Replacement suspension parts restore worn or damaged components on older Jeeps and similar vehicles, such as sway bar links, leaf spring shackle plates, bump stops and related hardware. Most listings here come from Crown Automotive and Omix-Ada, with branches for CJ, YJ, WJ, SJ and JK models. Match parts by model and year, then compare the products below.
Suspension Parts
Showing 1–12 of 26 resultsSorted by popularity
Shop Suspension Parts by type
-
-
-
CJ Replacement Suspension
Omix-ADA Suspension Master Rebuild Kit – 18290.03
- Omix-ADA Suspension Master Rebuild Kit, part number OAI18290.03, a direct OE replacement for Jeep CJ suspension
- Manufacturer fitment list covers the 1959–1960 and 1966–1975 Jeep CJ5 (Base, Renegade) and 1959–1960 and 1966–1975 Jeep CJ6 (Base)
- Built to the original specifications.
- Limited five year manufacturer warranty
SKU: OAI18290.03 -
-
YJ Wrangler Replacement Suspension
Omix-ADA Replacement Shock – 18203.09
- Front gas charged replacement shock, Omix-ADA part OAI18203.09
- Direct fit for 1982–1983 Jeep CJ5, 1982–1986 Jeep CJ7 and 1982–1985 Jeep Scrambler
- Stated lift/drop of 0 in., matching stock ride height
- Built by Omix-ADA to original Jeep specifications
- Limited warranty of five years from Omix-ADA
SKU: OAI18203.09 -
-
-
-
YJ Wrangler Replacement Suspension
Omix-ADA Heavy-Duty Replacement Shock – 18203.02
- Omix-Ada 18203.02 replacement gas shock for the front position
- Gas charged, replacement shock series, 0 in. lift or drop
- Fits Jeep CJ and Willys models, from the 1941–1942 Willys MB to the 1981 CJ7 and Scrambler
- Limited five year warranty from Omix-Ada
SKU: OAI18203.02 -
CJ Replacement Suspension
Omix-ADA Front Sway Bar Bushing (Black) – 18283.09
- Omix-Ada front sway bar bushing, black polyurethane, part OAI18283.09
- Fits 1999–2004 Jeep Grand Cherokee (WJ) Laredo, Limited, Overland, Special Edition and Sport
- Direct OE replacement with a limited five year warranty from Omix-Ada
SKU: OAI18283.09 -
CJ Replacement Suspension
Omix-ADA Front Replacement Leaf Spring – 18201.04
- Omix-Ada front leaf spring, part OAI18201.04, for listed Jeep CJ5 and CJ6 years
- 10-leaf factory-style spring pack, single spring, stock height direct replacement
- Position: front; bushings not included
- Covers 1955–1958 Willys CJ-5 and CJ-6 plus 1959–1960 and 1966–1975 CJ5 and CJ6 models
SKU: OAI18201.04
When to replace suspension parts
Suspension wear is gradual, so owners often notice it as a symptom: clunks over bumps, a loose or wandering feel, uneven tire wear, a sagging corner or body roll that seems worse than before. Rubber bushings crack, links wear in their joints, shackles and bushings loosen, and bump stops harden or crumble. Replacing them restores handling, and worn parts left alone put extra load on neighboring components.
Common parts in this category
- Sway bar links: Connect the sway bar to the axle or frame and reduce body roll. They are often sold individually and are specific to front or rear and to the driver or passenger side.
- Leaf spring shackles and plates: Let the leaf spring change length as it flexes and carry the shackle bolts.
- Bump stops: Rubber or foam stops that limit travel so the axle does not hit the frame.
- Bushings, bolts and hardware: Frequently replaced alongside other parts.
Identifying the right part
Replacement parts are very model-specific. The branches here are organized for vehicles such as the CJ, YJ Wrangler, WJ Grand Cherokee, SJ full-size and JK Wrangler, and details such as front or rear, side, and engine or axle option may affect the part. Use the part number on the old component if you can, and confirm fitment for your exact year, make and model. Note that some listings refer to the sale description for fitment, so read details carefully and check the manufacturer's specifications.
Installation notes
Suspension is safety-related, so support the vehicle on jack stands rather than a jack alone, and unload the suspension carefully before removing parts under spring tension. Replace parts in pairs when appropriate, such as both sway bar links. Tighten bushing bolts with the weight of the vehicle on the suspension so bushings are not twisted, and torque to specification. After repairs, check the alignment and brake line clearance. If you are not experienced with spring or shock work, use a professional.
Consider replacing related parts at the same time. Fresh bushings on old links, or new bolts and nuts with a new shackle, reduce the chance of repeating the job. Use anti-seize on bolt threads where the manufacturer allows, and keep a record of the parts you replaced, since older Jeeps often need work on several components in turn.
Inspection routine and matching parts
A simple inspection catches wear early. With the vehicle safely supported, look for cracks in bushings, torn boots, bent links and rust around leaf spring mounts. Push and pull on links and arms to feel for play, and check that shackle bolts have not elongated their holes.
- Match the part number from the old component whenever possible.
- Note whether the part is for the left or right side, or front or rear.
- Check whether your model has options, such as different axles or leaf packs, that change the part.
Original equipment style parts restore the factory feel, which suits stock vehicles that mostly see pavement. If you have added a lift or heavier bumpers-bumpers-tire-carriers-winch-mounts-2, ask whether a stock replacement is still appropriate, since components may need to be rated for different loads and angles.
Popular Suspension Parts brands
Suspension Parts FAQ
How do I know if sway bar links are worn?
Clunking or rattling over bumps, loose steering feel and increased body roll are common signs. Check the link ends and bushings for play or cracking. Replace links in pairs on the same axle.
Should I replace suspension parts in pairs?
Often yes, especially for parts like links, shackles and bushings that wear at similar rates. Replacing only one side can leave uneven handling, so consider doing both sides of the axle.
Can I use Jeep CJ parts on a YJ?
Not necessarily. Parts are specific to each model and sometimes year, because mounting points and sizes differ. Check the fitment details and your vehicle's specifications before choosing a part.
Do bump stops need replacing?
Replace them when they are cracked, flattened or missing. They protect the frame and axle at full compression. A lifted vehicle may need different stops, so check the lift kit instructions.
















