Overview
The Crown Automotive CRO5072935AC is a front sway bar link for the 2002–2005 Dodge Ram 1500 with 4WD, DR model.
It fits Laramie, SLT, SRT-10 and ST trims of the Ram 1500 in that range. For Ram 2500 or 3500 trucks, confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Front sway bar link.
- Direct fit for the 2002–2005 Dodge Ram 1500.
- Notes specify the DR model 1500 with 4WD.
- Part number CRO5072935AC for identification.
Sway bar links and handling
A sway bar link transfers movement between the sway bar and the suspension, which limits body roll in corners and keeps the bar working evenly on uneven ground. On a 4WD Ram, the link also takes load when one front wheel lifts over a rock or rut, so its ball joints and bushings see frequent movement.
Replace links in pairs when one has failed, since the other side often shows similar wear. Clunks over bumps, rattles at low speed or loose bar mounts are common signs the link is worn. Before fitting the new link, check that the bar is not bent and that the frame mounts are tight.
- Check both sides for play at the ball joints
- Inspect the sway bar mounts for cracks
- Tighten fasteners after the first few trail runs
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO5072935AC |
| Position | Front |
| Model note | DR model 1500 |
| Drive note | With 4WD |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2002–2005 Dodge Ram 1500 in Laramie, SLT, SRT-10 and ST trims.
Ram 2500 and 3500 trucks and other Dodge models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is intended for a 4WD DR model 1500, so check that your truck matches before fitting the link.
What’s included
One front sway bar link. Check the hardware in the package against your installation before starting.









