Overview
The Omix-Ada 18203.02 is a replacement shock absorber for older Jeep CJ-series and Willys vehicles. It is built to original specifications as a direct replacement, and it mounts at the front position.
It fits Jeep and Willys models from the 1941–1942 Willys MB through the 1981 Jeep CJ7 and Scrambler, with several CJ5, CJ6 and CJ7 trims. It is gas charged, belongs to the replacement shock series, and carries a limited five year warranty from Omix-Ada.
Key features
- Gas charged construction
- Replacement shock series
- Direct fit, built to original specifications
- Lift height is 0 in., meaning no lift or drop
- Limited five year warranty from Omix-Ada
Shock replacement basics
Shock absorbers control how quickly the spring compresses and rebounds, which keeps the tires in contact with the ground. Gas charged units resist foaming on rough trails and hold their damping longer than many older designs, though they still wear over time. A worn shock lets the body bounce after bumps, pulls the vehicle to one side, or fades on long descents.
Shocks are usually replaced in pairs on the same axle so that both sides damp evenly. Bushings and mounting hardware often show wear at the same time, so inspect them when the old shock comes off. Check the mounting eyes for cracks and make sure the new unit moves freely through its full travel before tightening.
- Look for fluid streaks on the body
- Check for bushing wear at each mount
- Test damping by pushing down on each corner
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18203.02 |
| Shock series | Replacement |
| Position | Front (the summary also says front or rear) |
| Hydraulic / gas charged | Gas charged |
| Lift height | 0 in. lift/drop |
| Fitment type | Direct fit |
| Warranty | Limited five year warranty from Omix-Ada |
Vehicle fitment
It fits Jeep and Willys vehicles from the 1941–1942 Willys MB to the 1981 Jeep CJ7 and Scrambler, including CJ3, CJ5, CJ6 and CJ7 models, Willys CJ-2, CJ-3, CJ-5 and CJ-6, and the 1956–1964 Jeep 6-226.
Other Jeep models outside the CJ and Willys range shown are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It mounts at the front position, so confirm which end of the vehicle it attaches to before fitting it.
What’s included
The item described is the shock itself. No mounting hardware or bushings are named.









