Overview
The Omix-Ada Rear Spring Shackle Bushing, part number 18271.20, is a black rubber bushing for the rear spring shackle on Jeep CJ5, CJ7 and Scrambler models. Each package contains one bushing.
Each spring eye and each spring hanger takes two bushings. Replacing both springs at one end of the vehicle takes 8 bushings, and each package contains one bushing.
Key features
- Black rubber construction
- One bushing per package
- Rear spring shackle position
- Two bushings per spring eye and two per spring hanger
Shackle bushing replacement planning
Shackle bushings sit at the ends of the leaf springs and let the shackle swing as the axle moves. Over time the rubber hardens, cracks or pulls away from its sleeve, and the result is clunking over bumps, a loose feel in the rear end or a shifting spring that wears its eye. Replacing them while the springs are down avoids repeated work.
Plan the job before loosening anything. Count the bushings for each end, including the spring eye and hanger positions, and set up enough supports so the axle hangs safely. Inspect the shackle plates and bolts for wear, since worn hardware can wallow even with new rubber. Lubricate the new bushings lightly, using a product that does not swell rubber.
Torque the shackle fasteners once the vehicle is back on the ground so the bushing is not twisted in its sleeve. Recheck the bolts after the first few drives, and listen for knocking that could mean a bushing was installed in the wrong order.
- Cracked or hardened rubber
- Clunking over bumps
- Worn shackle plates or bolts
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18271.20 |
| Type | Rear spring shackle bushing |
| Material | Rubber |
| Color | Black |
| Position | Rear |
| Quantity per package | 1 |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers:
- 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
Other Jeep models not in this list, such as the Wrangler YJ, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the bushings before you start. Each spring eye and each spring hanger takes two bushings, so one shackle end with both springs needs 8 bushings in total, and each package holds only one.
Support the vehicle securely before loosening any spring hardware.
What’s included
One rubber bushing per package.
Not included: Shackle hardware and spring components are not part of this package.










