Select your vehicle

Crown Automotive Sway Bar Link – J5355594

Crown Automotive

$28.67In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 9:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front sway bar link, non-adjustable
  • Notes cover 76-91 SJ full-size and J-series trucks
  • Reuses the hardware already on the truck
  • Fitment list shows 1976–1988 Jeep J10 and J20 (Base)
  • Part number CROJ5355594

Description

Overview

The Crown Automotive CROJ5355594 is a non-adjustable front sway bar link for 76-91 SJ full-size and J-series trucks. It reuses the hardware already on the truck.

Confirmed fit covers the 1976–1988 Jeep J10 and J20 (Base) range, which is narrower than the 76-91 SJ and J-series range. Verify your truck’s year and model before installing.

Key features

  • Front position sway bar link.
  • Non-adjustable design.
  • Reuses the hardware already on your truck.
  • Fitment list covers the Jeep J10 and J20 trucks.

Before you install

A sway bar link connects the end of the front sway bar to the suspension, so the bar can resist body roll as the axle moves. On a J-series truck driven over rough ground, the link takes repeated loading, and the joints at each end are where wear usually shows first. A worn link can make the front end feel loose on uneven terrain and can produce a clunk when the suspension cycles over bumps.

Before fitting a replacement, inspect the sway bar bushings, the frame brackets and the mounting bolts. Bent or cracked brackets can hold the new link at an angle and cause early wear. If the existing hardware is corroded or distorted, replacing it along with the link is a practical step, since the link is only as secure as the parts it bolts to. Retighten the fasteners after the first few drives on rough ground.

  • Check rubber or polyurethane bushings for cracks
  • Look for bent or cracked frame brackets
  • Inspect bolts for corrosion and thread damage
  • Replace worn components found during the same job

Specifications

Brand Crown Automotive
Part number CROJ5355594
Position Front
Location Front
Quantity Single
Type Non-adjustable
Hardware Use existing hardware
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 1976–1988 Jeep J10 (Base) and Jeep J20 (Base).

Match your truck’s year, model and trim to the coverage before ordering.

Installation notes

Reuse the hardware already on your truck rather than assuming new parts are included.

What’s included

One sway bar link. Bushings, washers and nuts are not included.

Fitment

VehicleYearsTrims
Jeep J101976–1988Base
Jeep J201976–1988Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is this link for the front sway bar?

Yes. It mounts to the front sway bar and is non-adjustable, so it is designed for the front position on a matching J-series truck.

Which trucks does it fit?

The link is intended for 76-91 SJ full-size and J-series trucks. Confirmed fit covers 1976–1988 Jeep J10 and J20 (Base) models. Confirm your truck's year and model before installing.

Does it come with bushings and hardware?

Reuse the existing hardware on your truck. Bushings, washers and nuts are not included, so inspect that hardware before installing the link.

How can I tell when a sway bar link needs replacing?

Common signs include clunking over bumps, rattling at the front end and visible play at the ball joint ends. Inspect the link and its bushings whenever you check other front suspension parts. Replace it if it moves loosely by hand or the joint boots are torn.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon