Overview
The Crown Automotive CROJ0359039 is a bronze leaf spring bushing in a gold finish, made to work at the front or rear main eye of a leaf spring. It is non-greaseable, and it fits early Jeep CJ, Willys and FC models from 1946 through 1963.
The list includes the 1959–1960 Jeep CJ3, the 1957–1963 FC150 and FC170 trucks, the 1962–1963 Gladiator, the 1963 J-200 through J-330 trucks, and several Willys models.
Key features
- Bronze bushing for the leaf spring main eye.
- Works on either the front or rear main eye.
- Non-greaseable design.
- Gold finish.
Inspecting leaf spring bushings
A leaf spring bushing sits in the eye at the end of the spring leaf and lets the spring pivot as the axle moves. When the bushing wears, the spring can rock side to side, causing clunks, wander and uneven tire wear. Check for play by levering the spring with a bar at the eye and watching for movement at the pin.
Bronze bushings handle loads well but still wear, and a worn eye can cause the spring pin to elongate the hole. Clean and inspect the spring eye before fitting a new bushing, and replace the pin or bolt if it shows wear. Non-greaseable bushings rely on the bushing material itself, so keep the spring eye free of grit and water.
- Look for cracks in the spring eye
- Check the pin for wear and bends
- Replace worn spring shackles and bolts together
- Inspect the bushing after off-road use
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CROJ0359039 |
| Type | Bronze |
| Service | Non-greaseable |
| Color | Gold |
| Mounting | Front or rear main eye |
| Fitment type | Direct fit |
Vehicle fitment
Crown lists direct fit for early Jeep CJ, Willys, FC and J-series trucks, including CJ-2, CJ-3 and Willys 1-Ton models.
Later CJ models, including CJ5 and CJ7, and other Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check which main eye your leaf spring uses before fitting, since the bushing works at either end.
What’s included
One bushing is included. Sleeves, pins or other hardware are not included, so confirm what your leaf spring setup needs.









