Throttle body spacers that mount between the throttle body and intake manifold on gasoline engines. AIRAID, aFe Power, Rugged Ridge, and Jet Performance Products make the kits here, usually anodized or polished aluminum with a gasket and hardware. They are meant to change airflow into the intake. Check the engine and model year on each product page, then compare the products below.
Throttle Body Spacers
Showing 1–12 of 29 resultsSorted by popularity
-
Throttle Body Spacers
Jet Performance Products Powr-flo TBI Spacer (Anodized) – 62173
- Serrated bore designed to raise air velocity into the intake manifold
- Anodized billet aluminum throttle body spacer, part number 62173
- Lists 2008–2010 and 2011–2012 Dodge Ram 1500 trucks
- Bolt-on installation
SKU: JET62173 -
Throttle Body Spacers
Rugged Ridge Throttle Body Spacer (Anodized) – 17755.02
- Rugged Ridge throttle body spacer, part number 17755.02
- Raises the throttle body 1/2 inch above the intake manifold
- Solid aluminum with black anodized finish and large bore
- Bolt-on fit for 3.8L engines
- Not legal for use in California or other CARB-standard states
SKU: RUG17755.02 -
Throttle Body Spacers
Rugged Ridge Throttle Body Spacer (Anodized) – 17755.01
- Fits 1991 to 2001 Cherokee (XJ), 1997 to 2006 Wrangler (TJ) and 1991 to 1995 Wrangler (YJ)
- Raises the throttle body 1 inch above the intake manifold
- Solid aluminum with black anodized finish
- Bolt-on install with hand tools; includes mounting hardware, gaskets and spacers
SKU: RUG17755.01 -
Throttle Body Spacers
Rugged Ridge Throttle Body Spacer (Anodized) – 17755.03
- Anodized aluminum throttle body spacer for the 3.6L V6 Jeep Wrangler (JK), 2012-2018
- Raises the throttle body 1 inch above the intake manifold
- Bolt-on, smooth large bore design
- Racing or non-highway use only; not legal in California or CARB states
SKU: RUG17755.03 -
Throttle Body Spacers
Jet Performance Products Powr-Flo TBI Spacer (Anodized) – 62170
- Fits 2008–2011 Toyota Sequoia in Limited, Platinum and SR5 trims
- Part number 62170, anodized billet aluminum Powr-Flo TBI spacer
- Serrated bore for throttle response and mid-range power
- Bolt-on installation
SKU: JET62170 -
Throttle Body Spacers
Jet Performance Products Powr-Flo TBI Spacer (Anodized) – 62116
- Fits 1987–2000 Jeep Cherokee XJ, 1987–1995 Wrangler YJ, 1987–1992 Comanche and more in listed trims
- Part number 62116, anodized billet aluminum Powr-Flo TBI spacer
- Serrated bore for improved throttle response and added power
- Bolt-on installation
SKU: JET62116 -
Throttle Body Spacers
Jet Performance Products Powr-Flo TBI Spacer (Anodized) – 62104
- Jet Performance Products Powr-Flo TBI spacer, part number 62104
- Billet aluminum with a serrated bore and anodized finish
- Stated to improve throttle response and add power
- Bolt-on installation, compatible with air intakes, computer mods and high flow exhausts
- No vehicle years or models named
SKU: JET62104 -
Throttle Body Spacers
AIRAID PowerAid Throttle Body Spacer (Anodized) – 520-605
- AIRAID anodized aluminum throttle body spacer, part number 520-605
- Helix bore with direct fit
- 50 State CARB EO # D-609-10
- Stated to improve low-end torque, throttle response and fuel efficiency
- No vehicle years or models named
SKU: EVE520-605 -
Throttle Body Spacers
AIRAID PowerAid Throttle Body Spacer (Anodized) – 520-538
- Fits 2004–2014 Nissan Titan, 2005–2014 Armada, 2004 Pathfinder Armada and 2004–2010 INFINITI QX56 in listed trims
- Part number 520-538, anodized aluminum throttle body spacer
- Helix bore; 50 State CARB E.O. D-609-10
SKU: EVE520-538 -
-
-
Throttle Body Spacers
AIRAID PowerAid Throttle Body Spacer (Anodized) – 510-622
- Fits 2007–2008 Toyota Tundra in Base, Limited and SR5 trims
- Part number 510-622, anodized aircraft-quality billet aluminum
- Helix bore for low-end torque and throttle response
- 50 State CARB approved, made in the U.S.A.
SKU: EVE510-622
What a throttle body spacer is
A throttle body spacer is a thick plate, often about half an inch, that sits between the throttle body and the intake manifold. Many have a bore shaped to swirl or straighten incoming air. Makers say this can improve throttle response and low-end torque. The effect is usually modest, and results depend on the engine, so treat claims of large gains with caution and look for dyno information from the manufacturer rather than marketing language alone.
Who uses them
These parts are popular on naturally aspirated truck, SUV, and Jeep engines, where owners look for small improvements in drivability. They are not a substitute for tuning, exhaust, or intake work, and they do not add power the way forced induction does. If you want a noticeable change, spacers are typically one part of a larger package that includes a cold air intake or a tune.
Details to compare
- Engine and year: the spacer must match the throttle body bolt pattern and bore, so check the listing for your engine size.
- Material and finish: aluminum is common, with anodized or polished surfaces that resist corrosion.
- Design: bore shape, such as helical or smooth, changes airflow behavior.
- Kit contents: look for a gasket, longer bolts, and washers if the spacer adds thickness.
- Emissions status: some products note a California Air Resources Board executive order number. If you live in a state that follows California rules, check that the part is approved for your vehicle.
Installation notes
Installation is usually simple and takes basic tools. Disconnect the battery, remove the intake tube, unbolt the throttle body, and set the spacer with new gaskets on each side. Use the longer hardware supplied, and tighten the bolts evenly to the manufacturer's torque spec to prevent vacuum leaks. A vacuum leak can cause a rough idle and a check engine light. Reconnect any sensors and lines carefully, and clear stored codes if needed.
Throttle position and idle relearn procedures differ by vehicle, so let the engine idle after installation and follow the steps in the service manual if the idle is unusual. Emissions rules vary by state, and modifications can affect inspection, so check local requirements. Always confirm fitment for your exact year, make, model, and engine with the manufacturer's specifications.
Choosing and avoiding mistakes
Check your engine's throttle body bore and bolt spacing rather than just the vehicle name, since the same model can have more than one engine option. Check the thickness of the spacer against the clearance under the intake tube and any sensors or linkages, since a thick spacer can foul a throttle cable or wiring. Be wary of spacers that are not machined flat, as a poor mating surface can leak. Do not stack more than one unless the maker says so, and never reuse a tired gasket. If the vehicle has a drive-by-wire throttle, take care not to damage the sensor connector. Monitor fuel trims or economy for a while after installation to confirm there is no leak or other problem.
Popular Throttle Body Spacers brands
Throttle Body Spacers FAQ
Does a throttle body spacer add horsepower?
Manufacturers claim small gains in torque and throttle response, but results vary by engine and are usually modest. Independent testing differs by vehicle. Treat it as a minor tweak and review the maker's published data.
Are throttle body spacers emissions legal?
Some carry an executive order number for California and similar states, and others do not. Rules vary, and a modification can affect inspection. Check the listing for approvals and confirm local requirements.
Do I need a tune after installing a spacer?
Usually not. Most spacers are designed to work with the factory computer without reprogramming. If you pair one with other intake or exhaust changes, a tune may help, but check the manufacturer's instructions.
Can a throttle body spacer cause a check engine light?
It can if the installation leaves a vacuum leak or if a sensor is disturbed. Use the new gaskets, tighten the bolts evenly, and reconnect all lines. If a code appears, recheck the seals and clear it.











