Performance Parts
Showing 25–36 of 2132 resultsSorted by popularity
-
Electrical Components
SPOD Modular SourceLT LED 6-Switch Panel with 36″ Battery Cables (Blue) – SL-MOD-84-B
Electrical ComponentsSPOD Modular SourceLT LED 6-Switch Panel with 36″ Battery Cables (Blue) – SL-MOD-84-B
- Universal fit SPOD Modular SourceLT LED 6-Switch Panel, part PODSL-MOD-84-B
- 6 circuits rated at 30 amps at 12.5 VDC per circuit, operating on 12VDC
- Six dual lit LED switches installed and pre-wired
- Carling Technologies Contura switches certified to IP66/68
- Includes a 10 foot control cable and battery cables
SKU: PODSL-MOD-84-B -
Electrical Components
SPOD BantamX Touchscreen and 84″ Battery Cables – BX-TSB-UNI-84
- Universal fit SPOD BantamX Touchscreen and 84 Inch Battery Cables, part PODBX-TSB-UNI-84
- 8-circuit control system rated at 30 amps at 12.5 VDC per circuit, operating on 12VDC or 24VDC
- Touchscreen control with built-in Bluetooth and sPOD Mobile App programming
- Integrated low voltage cutoff battery protection and 50amp auto-resetting circuit breaker
- Air pressure gauge not included
SKU: PODBX-TSB-UNI-84 -
Electrical Components
SPOD BantamX LED 8-Switch Panel (Blue) – BX-0708-JK-B
- SPOD BantamX LED 8-switch panel, blue, part PODBX-0708-JK-B
- Fits 2007–2008 Jeep Wrangler (JK) Rubicon, Sahara and X trims
- Eight circuits rated at 30 amps at 12.5 VDC each
- Eight dual lit blue LED switches, installed and pre-wired
SKU: PODBX-0708-JK-B -
-
Exhaust Spacers
Rugged Ridge Exhaust Spacer Kit – 17606.76
- Fits 2012–2018 Jeep Wrangler JK (2-door and Unlimited 4-door)
- Moves the Y-pipe back to protect the front driveshaft on lifted Jeeps
- Increases front suspension travel from 2.5 to over 5.5
- Hardware included; part number 17606.76
SKU: RUG17606.76 -
Electrical Components
Rugged Ridge 2-Position Rocker Switch (Passenger Eject) – 17235.13
- Rugged Ridge 2-Position Rocker Switch, Passenger Eject, part 17235.13
- Rated 20 amps with amber LED illumination when on
- 3-terminal hook-up for use in Jeeps, trucks, SUVs and cars
- Laser-etched logo; not waterproof
SKU: RUG17235.13 -
-
Performance Electronics
Rough Country Speedometer Calibrator – 90007T
- Direct fit for 2007–2018 Jeep Wrangler JK and 2006–2009 and 2011–2017 Dodge Ram 1500
- Rough Country speedometer calibrator, part number R/C90007T
- Reprograms the speedometer and updates the ECM for larger tires
- Keeps shift points and electronic stability control accurate
- Reset to stock function and 1-Year Warranty
SKU: R/C90007T -
Performance Electronics
Rough Country Speedometer Calibrator – 90005_A
- Fits 2017–2019 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD
- Resets speedometer readings for larger tires, part number R/C90005_A
- Updates shift points and recalibrates electronic stability control
- Reads diagnostic codes and can reset to stock settings
- Includes downloadable updates and a 1 year warranty
SKU: R/C90005_A -
Performance Electronics
Rough Country GM Speedometer Calibrator – 90009_A
- Fits 2017–2019 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD
- Plug-and-play speedometer calibrator for larger tires, part number R/C90009_A
- Updates the ECM for accurate shift points and electronic stability control
- Reads diagnostic codes and resets the speedometer to stock settings
- Includes a 1-Year Warranty
SKU: R/C90009_A
What this category covers
Performance Parts is a broad grouping, and the subcategories show how wide it runs. Exhaust headers, pipes, cat-back systems and mufflers handle exhaust flow. Intake kits, air filters and throttle body spacers affect how air reaches the engine. Gauges and gauge pods monitor what the engine is doing, while spark plugs, ignition coils and plug wire parts support combustion.
Fuel system items such as replacement tanks, sending units, fuel lines and filters are here too, along with maintenance products like oil filters, serpentine belts, valve cover gaskets and additives.
Setting realistic expectations
Bolt-on parts usually deliver modest changes. A freer-flowing exhaust or intake may change sound and throttle feel more than it changes measured output, and gains depend on the engine, the tune and the rest of the system. Treat any manufacturer power claim as a figure to read in context, and be skeptical of anything that promises large gains from a single part.
For trail vehicles, low-speed torque, reliability and ground clearance often matter more than peak horsepower. A muffler that tucks up out of harm's way can be a better choice than a larger one that hangs low.
How to choose
- Match the part to the exact engine, year and model, since exhaust routing and sensor locations change between generations.
- Check whether a product is described as direct fit or requires cutting, welding or modification.
- Look at material, such as aluminized or stainless steel for exhaust parts, when corrosion resistance matters.
- Confirm emissions status. Parts that alter emissions equipment may not be legal for road use in every state, so check local regulations.
- Compare gauge face size, sender type and electrical or mechanical operation before ordering a gauge.
Installation notes
Many parts in this category are simple swaps with common hand tools, but exhaust work involves heat, rust-seized hardware and heavy components, so support the system properly and replace gaskets and clamps. Disconnect the battery before electrical or ignition work, and use the torque values from the factory service manual for spark plugs and fasteners.
Fuel system work calls for care. Relieve pressure, avoid ignition sources and consider professional installation for tanks and high-pressure lines. After changing sensors, intakes or tuning modules, watch for check engine lights and confirm everything reads normally.
Further checks and care
Confirming fitment and reading specifications
Performance parts are rarely universal. Write down the engine size, fuel type, transmission and model year, and compare them with the application list in each product description. Part numbers are the most reliable reference, since two similar-looking mufflers or modules can differ in inlet size, sensor ports or connector style. If a product mentions California or federal emissions status, read that note closely, and keep the vehicle's original parts if you may need to return to stock.
Maintenance and inspection
Performance hardware needs periodic checks. Inspect exhaust hangers, clamps and flange bolts for looseness or cracks, and look for soot trails that signal leaks. Replace air filters on the interval the maker recommends, and use the correct cleaning kit if the filter is reusable, because too much oil can contaminate airflow sensors. Watch gauge readings after any change, and investigate unusual temperatures, pressures or fuel trims promptly instead of assuming the new part is at fault.
Popular Performance Parts brands
- Crown Automotive (362)
- K&N Filter (345)
- Omix-Ada (249)
- MagnaFlow Exhaust (104)
- Afe Power (95)
- AIRAID (95)
- Flowmaster Exhaust (80)
- S&B Filters (59)
- Banks Power (51)
- Auto Meter (48)
- Borla (46)
- Lucas Oil (44)
Shop Performance Parts by type
- Exhaust Systems, Headers, Pipes and Hardware (211)
- Mufflers (86)
- Oil Filters (71)
- Electrical (128)
- Gauges (68)
- Intake Kits, Air Filter & Throttle Body Spacers (496)
- Motor Mount (50)
- Throttle Body Spacers (29)
- Speedometer Calibrators (36)
- Performance Electronics (60)
- Replacement Fuel Tanks (30)
- Fuel Hose (34)
- Replacement Fuel Tank Sending Unit (30)
- Performance Ignition Systems (40)
- Spark Plugs (14)
- Fluids, Additives and Sealants (23)
- Gas Caps and Filler Assemblies (21)
- Gauge Pillars (18)
- Fuel Line (14)
- Carburetors, Intake Manifolds, and Throttle Body (40)
- Fuel Tank Strap (16)
- Fuel Filter (14)
- Fuel and Oil Filters (23)
- Ignition Coils (11)
- Distributors (11)
- Valve Cover Gaskets (14)
- Serpentine Belt (13)
- Spark Plug Wire Divider (13)
- Speedometer Cable (13)
- Engine Gaskets (11)
Performance Parts FAQ
Will a performance part void my vehicle warranty?
It can depend on the part and how it relates to a failure. Warranty rules vary by manufacturer and region, so read your warranty documents and ask the dealer or manufacturer before modifying a vehicle that is still covered.
Are performance exhaust and intake parts street legal?
Not always. Anything affecting catalytic converters, oxygen sensors or other emissions equipment may be restricted, and rules differ by state. Check the product notes for compliance information and verify local regulations before installing.
Do I need a tune after installing these parts?
Simple filters and cat-back exhausts often need no tune. Larger changes, such as modules, throttle body or fuel system modifications, may benefit from calibration. Follow the instructions published by the part's manufacturer for your engine.









