Overview
The Painless Wiring Trail Rocker under-dash accessory control system, part number PWP57021, lets you switch accessories on and off from the dash of a CJ Jeep. It fits 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler models.
The power center holds eight fuses and relays inside a weatherproof housing and provides weatherproof connectors and wiring for accessories ranging from lights to air lockers. The switches are mounted in a custom panel on the dash. The system includes dedicated wires for a winch, but winch operation requires the Winch Control Add-on Kit, part number 57150, which is not part of this kit.
Key features
- Eight prewired switches mounted in a custom dash panel
- Power center with eight fuses and relays in a weatherproof housing
- Weatherproof connectors and wiring for accessories
- Plug-n-play design with detailed instructions
- Dedicated winch wires, with the add-on kit required for operation
Planning an under-dash layout
An under-dash accessory system brings a lot of wiring into a small space, so planning matters. Decide where each switch will sit on the panel, and think about how the power center will be mounted so the connectors are easy to reach later. Keep the layout simple enough that you can trace any circuit with a quick look.
Good grounds and clean connections prevent many problems on older CJ wiring. Scrape paint from ground points, use dielectric grease on weatherproof connectors, and keep harnesses away from exhaust and moving parts. After the system is running, check each accessory before the trail, since loose connections are easier to fix at home.
- Mark each switch before mounting
- Clean ground points to bare metal
- Use dielectric grease on connectors
Specifications
| Brand | Painless Wiring |
|---|---|
| Part number | PWP57021 |
| Mounting location | Dash |
| Switches | Eight prewired switches are included in the dash panel |
| Fuses and relays | Eight, in the power center |
| Air pressure gauge | Not included |
| Winch control | Add-on Kit 57150 required |
| Fitment | Direct fit |
Vehicle fitment
It fits 1976–1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade trims, 1976–1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and 1981–1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR trims.
The list does not include Wrangler YJ or TJ models, or CJ models outside 1976–1986. Confirm your vehicle’s year, model and trim before installing.
Installation notes
Mount the switch panel on the dash, then route the power center wiring to each accessory. The plug-n-play design and detailed instructions make the install straightforward. Disconnect the battery before routing power from the power center to any accessory.
What’s included
The switch panel and the power center with eight fuses and relays come with weatherproof connectors and wiring.
Not included: The Winch Control Add-on Kit, part number 57150, which is required for winch operation, and an air pressure gauge.









