Overview
The Omix-Ada 17209.05 is a water temperature gauge for the speedometer cluster. It fits Jeep CJ-3, CJ-5, CJ-6, CJ5A, CJ6A, CJ7 and Scrambler models, and Willys CJ-3, CJ-5 and CJ-6 vehicles.
It is a factory style replacement, so the gauge has to match the shape of the one already in your cluster. Compare the two before you fit it.
Key features
- Water temperature reading for the speedometer cluster
- Factory Match Jeep series with an O.E. replacement mounting size
- Black face with standard units
- Must match the shape of the factory gauge
Before swapping the cluster gauge
A temperature gauge in a speedometer cluster is driven by a sending unit in the engine, so the wiring and sender matter as much as the face. Before buying, pull the old gauge and look at the back of the housing. Note the connector style, terminal layout and mounting ears, then compare them with the replacement. A gauge with a matching face but different connections may need an adapter or a new sender.
Clusters of this age often show worn printed traces and tired solder joints at the gauge terminals. Inspect those while the cluster is out and clean any corrosion. After reinstalling, check that the needle returns to its stop with the ignition off. Test the reading with the engine warm, watching for a steady climb and a stable settle. A needle that jumps or sticks usually points to a loose connection or failing sender rather than the gauge itself.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17209.05 |
| Gauge type | Water temperature |
| Gauge series | Factory Match Jeep |
| Installed in | Speedometer cluster |
| Mounting size | O.E. Replacement |
| Face color | Black |
| Units | Standard |
Vehicle fitment
It fits Jeep CJ-3 (1959–1960, 1966), CJ-5 (1959–1960, 1966–1983), CJ5A (1966–1968), CJ-6 (1959–1960, 1966–1975), CJ6A (1966–1968), CJ7 (1976–1986), Scrambler (1981–1985), and Willys CJ-3, CJ-5 and CJ-6 (1955–1958).
Wrangler, Cherokee and Wagoneer models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the existing cluster gauge with the product image before fitting, because the gauge must match the factory shape. Fuel and temperature gauges are often replaced together during a cluster refresh.
What’s included
This is the temperature gauge only, so check the package contents against your installation before starting.










