Overview
The Performance Distributors P/D031105 is an adapter wiring harness for the Screamin’ Demon Coil on 1991 and 1992 Jeep vehicles. It includes connections for splicing into the factory plug-in wiring harness, so the coil can be wired to the existing harness.
It is sold separately from the ignition kits and must be purchased on its own.
Key features
- Adapts the Screamin’ Demon Coil to the factory plug-in wiring harness on 1991 and 1992 Jeeps
- Includes connections for splicing into the factory wiring harness
- Described by the manufacturer as easy to install
- Not sold with the ignition kits; purchased separately
Wiring adapter basics
Splicing an adapter harness into factory wiring is a job where clean, secure connections make the difference. Strip wire ends cleanly, use proper crimp connectors or solder with heat shrink, and avoid leaving bare copper exposed. Route the new wiring away from exhaust, sharp edges and moving parts.
Before connecting, compare each wire color and pin position with the factory harness. Mislabeled wires are a common source of intermittent faults, and a simple multimeter check can confirm continuity before the battery is reconnected. Keep the battery disconnected during the work.
Ignition components run hot and produce high voltage, so inspect insulation after installation and secure the harness with ties. Replace any cracked or brittle wiring you find during the job, since a weak connection can cause misfires that are hard to trace.
Specifications
| Brand | Performance Distributors |
|---|---|
| Part number | P/D031105 |
| Part type | Adapter wiring harness |
| Compatible coil | Screamin’ Demon Coil |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The adapter is for the Screamin’ Demon Coil on 1991 and 1992 Jeeps, so match your vehicle to those years before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The harness connects by splicing into the factory wiring, so basic automotive wiring experience is needed. Work on the ignition wiring with the battery disconnected.
What’s included
The adapter wiring harness, with connections for splicing into the factory harness.
Not included: the Screamin’ Demon ignition kit parts, which must be purchased separately.








