Overview
The Powermaster Starter 9200 is an upgrade type starter with a torque rating of 150-200 ft/Lbs.
This starter is a universal fit design, so engine and mounting compatibility must be checked before installing.
Key features
- Upgrade type starter
- Torque rating of 150-200 ft/Lbs
- Powermaster part number POW9200
- Universal fit listed
Choosing and fitting a starter
A starter motor cranks the engine until it fires and runs on its own, so it draws a large burst of current each time you start. Upgrade starters are usually chosen for stronger cranking in engines with high compression, larger displacement or cold-weather use. A higher torque rating only helps when the battery, cables and ground connections can deliver the current the starter needs.
Before buying, match the mounting face, bolt pattern, gear and electrical terminals to your engine rather than relying on the starter name. Cables and ground straps are often replaced at the same time, because corroded or undersized cabling can cause slow cranking that looks like a starter fault. Recheck the work after the first few starts.
- Clean battery terminals and cable ends before fitting the starter
- Inspect the flywheel or flexplate ring gear for worn or missing teeth
- Torque mounting bolts to the value in your service manual
Specifications
| Brand | Powermaster |
|---|---|
| Part number | POW9200 |
| Type | Upgrade |
| Torque rating | 150-200 ft/Lbs |
Vehicle fitment
Fitment is not confirmed by vehicle year, model or chassis code. Confirm the starter’s mounting and electrical connections against your engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Disconnect the battery before connecting the starter’s heavy battery cable. Starter installation depends on the engine and bolt pattern, so check both before fitting.
What’s included
Check the package contents against your installation before starting, including solenoid, cables and mounting hardware.










