Lighting & Lighting Accessories
Showing 1165–1176 of 2467 resultsSorted by popularity
-
Offroad Racing
D-Series Dually HD Flood LED Light
- Universal fit lighting pod with a surface bracket mount
- Flood optic with side-shooting LEDs for a wide spread beam
- Up to 102% more raw lumens depending on optics chosen.
- Up to 120 degrees of horizontal coverage in pairs or as a single light
- Part number 222113, UPC 849774027055
SKU: RIG222113 -
-
Offroad Racing
Rigid Industries 20 Inch Adapt LED Light Bar – 220413
- Rigid Industries 20 inch Adapt LED light bar, part 220413
- Eight beam patterns ranging from broad close-range to 15 degree spot
- Active View Technology changes the pattern as speed changes
- Includes the Dash Controller, Under Dash Module and wiring harness
- Universal fit, LED light source, sold as a single bar
SKU: RIG220413 -
-
-
Offroad Racing
D-Series Dually 60 Deg. Diffusion LED Light
- Side-shooting LEDs widen the beam; up to 120 degrees horizontal coverage in pairs or singles
- Forward optics available in Spot, Flood or Driving; up to 102% more raw lumens
- Square flush-mount pod, universal fit with no vehicle named
SKU: RIG211513 -
Offroad Racing
D-Series Midnight Spot Light
- Rigid Industries D-Series PRO Midnight spot light, part number 211213BLK
- 3-inch body with black finish and Midnight Optics spot lens
- Flush mount, LED bulb type, clear lens
- Up to 102% more raw lumens depending on optics chosen
- Universal fit; not made for one vehicle
SKU: RIG211213BLK -
-
Lighting Accessories
Radiance Backlight
- Rigid Industries Radiance Backlight, part number 210043: 10-inch LED light bar
- Universal fit, not tied to a specific year, make, model or trim
- Built-in backlighting in white, amber, red, blue and green
- Designed with LED technology for up to 35% more raw lumens than earlier bars
- Wiring harness and multi-trigger switch included
SKU: RIG210043 -
Offroad Racing
Rigid Industries Ignite LED Flood Light Motorcycle Kit – Surface Mount (Black) – 20741
Offroad RacingRigid Industries Ignite LED Flood Light Motorcycle Kit – Surface Mount (Black) – 20741
- Motorcycle kit with a pair of Ignite lights, wiring harness and sealed control switch
- High and Low settings; 1000 raw lumens per light, about 1 amp at full power
- Each light weighs less than 4 ounces; universal fit, not model-specific
SKU: RIG20741
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.










