Overview
The Rigid Industries Radiance Backlight, part number 210043, is a 10-inch LED light bar with built-in backlighting, sold as a single bar from the Radiance Plus line. It is a universal-fit lighting accessory rather than a vehicle-specific part, so the bar is not tied to a particular year, make, model or trim.
Rigid built the Radiance Plus bars with the same high-grade aluminum alloy housing as its E-Series bars, but adds improved LED technology that Rigid says delivers up to 35% more raw lumens than before. The bar combines a black exposed circuit board, forward-projecting Broad Spot optics and large back-lit Rigid branding plates.
Key features
- Improved LED technology, which Rigid says delivers up to 35% more raw lumens than earlier bars.
- Broad Spot optics that project forward and combine the attributes of a spot and a flood beam pattern.
- Built-in backlighting available in white, amber, red, blue and green.
- High-grade aluminum alloy housing shared with the E-Series light bars.
- Black exposed circuit board inside the bar.
- Large back-lit Rigid branding plates with a recently updated design.
- Wiring harness and multi-trigger switch included for installation.
Mounting and power planning
A 10-inch LED bar draws enough current that the wiring should be planned before mounting. Use a fused, relay-wired circuit so the switch carries only a small signal rather than the full load. Route cables away from heat sources and moving parts, and secure them so they do not rub on the frame.
Auxiliary lights are often used off-road, where rocks, branches and mud can damage the lens and housing. Check the lens for cracks and the seal for moisture after each trip. Backlighting is also a styling choice, so decide on color and brightness before installing to avoid rewiring later.
- Fuse the circuit close to the battery
- Check the lens and seals after trail use
- Confirm local rules before using on public roads
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 210043 |
| UPC | 849774028649 |
| Type | Light bar |
| Size | 10 inch |
| Bulb type | LED |
| Lens color | Amber |
| Backlight colors | White, amber, red, blue, green |
| Housing | High-grade aluminum alloy |
| Optics | Broad Spot |
| Mounting type | Bracket |
| Sold as | Single |
| Fitment | Universal Fit |
Vehicle fitment
The Radiance Backlight is universal fit, so it is not tied to a specific year, make, model or trim. Fit depends on the mounting location and bracket on your vehicle, so check that the 10-inch bar will mount where you intend.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included wiring harness and multi-trigger switch are the wiring this bar needs, and Rigid says they make installation quick and painless. Use a fused, relay-wired setup for auxiliary lighting, and check local rules before using auxiliary lights on public roads.
What’s included
The Radiance Plus light bar comes with a wiring harness and multi-trigger switch. It is sold as a single unit.
Not included: Confirm whether mounting hardware for the bracket is supplied before installing the bar.









