Overview
The Rigid Industries D-Series Dually HD Flood LED Light, part number 222113, is a compact square LED pod for applications that need a wide flood beam, including A-pillar, fog light and motorcycle mounting. It is a universal fit lighting product, so it is not built for one specific make, model or year.
The forward-facing LEDs sit behind a flood optic, and extra LEDs aimed to the side widen the horizontal spread. Output reaches up to 102% more raw lumens, depending on the optics chosen, and pairs or single units can cover up to 120 degrees horizontally. The same pod is also made with Spot and Driving optics; this version is the flood option for a wide spread.
Key features
- Flood optic for a wide spread beam suited to A-pillar, fog light and motorcycle use
- Side-shooting LEDs add horizontal coverage on one or both sides, depending on configuration
- Up to 102% more raw lumens depending on the optics chosen
- Up to 120 degrees of horizontal coverage when used in pairs or as a single light
- Clear lens, LED bulb type and square light shape
- Surface mounting with a bracket
Mounting a surface flood pod
A surface bracket puts the light in plain view, so the mounting spot matters for both coverage and protection. Choose a flat, solid area that will not flex under load, and make sure the lens sits clear of bars, mesh and mud flaps. A wide flood beam is easiest to use when it is placed high enough to light the ground ahead without glare.
Before drilling, dry-fit the bracket and check where the wiring will run. Keep the power feed short and protected, and leave a loop in the lead so the bracket can move without tension on the connection. A relay near the battery end keeps the switch wiring light.
Flood pods are often used in pairs for even coverage, so mirror the placement on both sides. After the first few trail runs, recheck the bracket fasteners and look for chafing on the leads. Cleaning the lens before each night outing keeps the beam spread as wide as it was designed.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 222113 |
| UPC | 849774027055 |
| Type | Flood |
| Lens color | Clear |
| Bulb type | LED |
| Light shape | Square |
| Mounting type | Bracket | Surface |
| Size | 0 to 10 in | 3 in |
| Sold as | Kit | Single |
Vehicle fitment
This is a universal fit lighting product rather than a vehicle-specific part, so no year, make, model or trim applies. Mount it with the surface bracket on a flat, solid location that can hold the light and bracket securely.
Installation notes
Pairs and single units place the side-shooting LEDs differently: pairs put three side LEDs on one side of each fixture, while singles carry a pair of side LEDs on both sides. Decide the orientation before fixing the bracket. Wire the light through a fuse and relay, and check local rules on auxiliary driving lights before using them on public roads.
What’s included
Check the bracket, wiring and hardware for either option when the package arrives, and plan to add power wiring, a switch and a relay separately.
Not included: power wiring, switch and relay (plan to add these separately)









