Overview
The Rigid Industries Ignite Motorcycle Kit (part number 20741) is a set of surface-mount LED flood lights made for motorcycles. The kit includes a pair of Ignite lights, each rated at 1000 raw lumens, with a housing that weighs less than 4 ounces and measures approximately 1.4 x 1.4 x 2 inches.
The kit fits touring bikes, cruisers, dirt bikes and most other motorcycles. It has High and Low settings and a sealed control switch, so riders can adjust output as conditions change. It is a universal fit kit, so no motorcycle make, model or year applies.
Each light draws about 1 amp at full power, a modest electrical load. Spot and Flood patterns are available in the Motorcycle Kit line, and this part is a flood pattern with a white lens.
Key features
- Pair of Ignite lights in one kit
- High and Low settings for changing conditions
- Sealed control switch
- Wiring harness included
- 1000 raw lumens per light, about 1 amp at full power
- Each light weighs less than 4 ounces
- Surface mount with round white lens and LED bulbs
Riding with auxiliary lights
Auxiliary lights on a motorcycle add weight and change how the bike handles at the front, so placement should stay close to the centerline where possible. Lights that sit far out or high can catch the wind and shift the balance at speed. Keep the wiring tidy and well clear of the throttle, brake and clutch controls.
The sealed control switch makes it easier to change output without taking a hand far from the bars, but it still needs a sensible location. Mount it where it can be reached with gloves on and where the cable will not rub. Riders who go out in rain or at night often check the lights before each trip, which catches loose clamps and damaged lenses early. Clean the lens regularly so the output stays even.
- Check fork and handlebar clearance before tightening
- Keep the harness clear of exhaust heat
- Recheck clamps after the first ride
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 20741 |
| UPC | 849774015021 |
| Configuration | Pair of lights |
| Light output | 1000 raw lumens per light |
| Current draw | About 1 amp at full power |
| Housing weight | Less than 4 ounces per light |
| Dimensions | Approximately 1.4 x 1.4 x 2 inches |
| Beam pattern | Flood |
| Settings | High and Low |
| Bulb type | LED |
| Lens color | White |
| Light shape | Round |
| Mounting type | Surface |
| Finish | Black |
Vehicle fitment
Universal fit applies here, so motorcycle make and year do not limit the kit. Pick positions that keep the lights and harness clear of moving parts and that give a clear view ahead.
The kit suits permanent mounting in many positions on the bike. Check clearance at the handlebars, fork and frame before tightening any hardware. Check fit for your motorcycle’s year, model and trim before ordering.
Installation notes
The sealed control switch and wiring harness are suitable for permanent mounting. Run the harness through a fused relay, keep it clear of exhaust heat, and check local rules on auxiliary motorcycle lights before riding on public roads.
What’s included
The kit includes a pair of Ignite Series lights, hardware, a wiring harness and a sealed control switch.




























