Overview
The Rigid Industries D-Series Dually 212223 is a 10 Deg. spot LED light with a flush mount and hybrid design, supplied as a set of 2 lights. Rigid Industries marks it universal fit, so it is not tied to one make, model or year.
It has 4 amber LEDs and belongs to the D-Series Dually range.
Key features
- Flush mount design
- Hybrid light type
- 4 Amber LEDs
- Set of 2 lights
Flush mounts and cutouts
A flush mount sits level with the panel, which keeps the light close to the body and reduces protrusion. That look comes with a fitting requirement: the cutout must match the light body and leave room for the housing and wiring behind the panel. Measure twice and dry-fit before any cutting.
Panels vary, so check the material and reinforcement behind the opening. Plastic and thin metal may need backing so the light does not flex or pull free. Seal the gap around the housing against water and road spray, and route the cable through a grommet or protective loom so it cannot chafe.
- Confirm the cutout size against the light body
- Check for reinforcement behind the panel
- Use a grommet where the cable passes through
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 212223 |
| UPC | 849774024498 |
| Beam | 10 Deg. spot |
| Mount | Flush |
| Light type | Hybrid |
| LEDs | 4 Amber LEDs |
| Quantity | Set of 2 |
Vehicle fitment
No vehicle is named for this light. It is universal fit, so it is not vehicle-specific. Check that the flush mount opening suits your bumper or panel before installing.
Installation notes
Flush mounts need a cutout that matches the light body, so measure the opening first. Run the wiring through a fused relay circuit, and check local road-use rules for fog and driving lights.
What’s included
A set of 2 D-Series Dually spot LED lights.









