Steering Stabilizers
Showing 49–60 of 79 resultsSorted by popularity
-
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 222530B
- Fits the 1984–1985 Toyota 4Runner and 1984–1985 Toyota Pickup
- Extended length 22.37 inches, collapsed 13.13 inches, travel 9.24 inches
- Stem upper mount and stem lower mount
- Sold individually, brackets not included
- Part number EXP222530B
SKU: EXP222530B -
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 220500B
- Fits two-door and Unlimited four-door Wrangler JK bodies, 2007–2018
- Extended length 20.5 in, collapsed 12.98 in, travel 7.52 in
- 1.75 in body diameter with loop mounts at both ends
- 5/8 in chrome hardened shaft and 1-3/8 in nylon banded piston
- Single stabilizer in black powder coat; brackets and shock boot not included
SKU: EXP220500B -
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 220230B
- Single hydraulic steering stabilizer, 17.5 inches extended
- Designed to reduce wheel vibration and bump steer
- Fits 1979–1991 trucks and SUVs from several makes
- Brackets and shock boot not included; part number 220230B
SKU: EXP220230B -
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 219505B
- Pro Comp PRO-X twin tube steering stabilizer, part number EXP219505B, sold individually
- Extended length 19.35 in, collapsed length 12.17 in, travel length 7.18 in
- Loop ends at both ends, 1-3/8 inch nylon banded piston and 5/8 inch chrome hardened shaft
- Fits 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ
SKU: EXP219505B -
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 219500B
- Fits 1986–1995 Toyota 4Runner and Toyota Pickup per Pro Comp’s list
- Extended 19.91 in, collapsed 12.17 in, travel 7.74 in
- Twin tube design with 5/8-inch chrome hardened shaft
- Loop mounts both ends; brackets not included
- Part number EXP219500B, sold individually
SKU: EXP219500B -
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 219200B
- Single PRO-X twin-tube hydraulic steering stabilizer, 19.91 inches extended
- Fits 1992–1998 Chevrolet, GMC and Jeep trucks and SUVs
- Loop mounts at both ends; brackets not included
- 5/8-inch chrome-hardened shaft and nylon-banded 1-3/8-inch piston
- Part number 219200B; sold individually
SKU: EXP219200B -
Steering Stabilizers
Pro Comp PRO-X Twin Tube Steering Stabilizer – 217510B
- Fits 1975–1983 Jeep CJ5, CJ7, Cherokee (SJ), Wagoneer (SJ), J10 and J20, and related Jeep models
- Extended length 17.5 inches, collapsed 10.73 inches, travel 6.77 inches
- Single stabilizer, stem upper mount, loop lower mount
- Sold individually, brackets and shock boot not included
- Part number EXP217510B
SKU: EXP217510B -
Steering Stabilizers
Pro Comp PRO-M Steering Stabilizer – PR2905
- Single PRO-M monotube steering stabilizer, part number PR2905
- Extended length 26.1 inches; collapsed length 16.4 inches
- Fits 1999 Ford F-250 and 1999–2004 F-250 and F-350 Super Duty
- Shock boot included; mounting brackets not included
SKU: EXPPR2905 -
Steering Stabilizers
Pro Comp PRO-M Steering Stabilizer – PR2904
- Fits the 2005 to 2018 Ford F-250 and F-350 Super Duty and the 2008 to 2012 and 2018 Dodge Ram 2500 and 3500
- Monotube design with a 14mm chrome hardened shaft
- Extended length 22.8 inches, collapsed length 14.6 inches
- Mounting brackets not included
- Part number PR2904, zinc finish
SKU: EXPPR2904 -
-
-
Why lifted vehicles need stabilizers
Raising a vehicle and adding larger, heavier tires changes the leverage on the steering system. Longer sidewalls and more rotating mass transmit more shock into the tie rod and steering box, and a steering stabilizer helps damp that energy. This part of the catalog sits with the suspension products because many lift kits either include a stabilizer or recommend one, and the geometry of the lift can change the length or bracket needed.
Stabilizer and bracket components
- Stabilizer cylinders: a hydraulic damper that comes as a single unit, with some twin-tube and reservoir designs for added oil capacity and cooling.
- Dual kits: two cylinders and brackets for vehicles with large tires or aggressive use.
- Brackets: clamps or weld-on mounts that attach the damper to the axle and tie rod, which may need to change when the suspension height changes.
Choosing for your lift
Look at your lift height, tire size and how you use the vehicle. A mild lift with modest tires may not need more than a single unit. Heavier tires and bigger lifts generally benefit from a dual stabilizer or a high-capacity design. Compare the stated lengths and stroke of each unit with the manufacturer's data, because a unit that bottoms out or runs out of stroke at full lock can fail early and may restrict steering.
Before you add a stabilizer
Treat the stabilizer as part of the whole front end. Check the track bar angle, caster and wheel alignment after a lift, and replace worn bushings, ball joints and tie rod ends. Steering wobble that appears after installing a lift often points to caster, track bar or alignment issues, and a stabilizer should supplement, not replace, the correct repair.
Installation advice
Use the supplied hardware and follow the manufacturer's torque specifications. Cycle the steering from lock to lock before driving to confirm nothing rubs or binds. Because steering and suspension affect vehicle control, professional installation and an alignment are recommended, and local rules on lifted vehicles vary, so check your state's requirements.
Matching the stabilizer to your whole suspension package is the key step. Lift kits from different manufacturers change axle position, track bar mounts and tie rod height in different ways, so the clamp and bracket that fit one lift may not fit another. Check whether the stabilizer bracket clamps to the tie rod, which needs the right diameter, or bolts to a dedicated mount. Dual setups need two sets of mounting points, and they must not interfere with each other or with the drag link.
It also pays to think about durability. Stabilizers hang low and take impacts from rocks, mud and water crossings. Gas-charged and twin-tube designs generally hold up better in sustained rough use, while basic hydraulic units are suited to lighter duty. Inspect the rod for scoring and the bushings for wear when you service the vehicle. If you replace worn components elsewhere in the front end, such as tie rod ends or the track bar, do so before judging how well the stabilizer works, because loose parts hide in the steering and make any damper seem ineffective.
Popular Steering Stabilizers brands
- Pro Comp Suspension (23)
- Rough Country (16)
- Skyjacker (15)
- Bilstein (5)
- TeraFlex (5)
- Fabtech (3)
- ARB 4x4 Accessories (2)
- Rancho (2)
- Rubicon Express (2)
- California Super Trucks (1)
- Crown Automotive (1)
- FOX (1)
Steering Stabilizers FAQ
Do lift kits come with a steering stabilizer?
Some do, and others list one as an option or recommendation. Check the contents of your lift kit and the manufacturer's notes. Larger tires may call for a stronger or dual unit.
What is the difference between a stabilizer and a stabilizer bracket?
The stabilizer is the damper itself. The bracket is the mount that attaches it to the axle or tie rod. After a lift, a different bracket may be needed to keep the stabilizer aligned and within its stroke.
Is a dual stabilizer better than a single?
Not automatically. Dual setups add damping for big tires and hard use, but they also add weight and cost. Choose based on tire size, lift height and driving, and follow the manufacturer's recommendation for your vehicle.
Should I get an alignment after installing a lift and stabilizer?
Yes. A lift changes caster and toe, and a stabilizer will not correct bad geometry. An alignment after the lift is recommended for safety and tire wear.











