Overview
The Pro Comp PRO-X Twin Tube Steering Stabilizer, part number 219200B, is a single hydraulic steering stabilizer with a 19.91-inch extended length and a 12.17-inch collapsed length. It fits 1992–1998 GM and Jeep trucks and SUVs, and it is sold individually.
The stabilizer is designed to improve handling and reduce wheel vibration, which can lead to suspension component fatigue and failure. It helps reduce bump steer caused by oversized tires or rough roads. The twin-tube design comes in extended lengths and uses a Teflon rebound stop.
Key features
- Twin-tube hydraulic design for damping
- Extended length 19.91 inches with 7.74-inch travel
- 5/8-inch chrome-hardened shaft
- Nylon-banded 1-3/8-inch piston
- Teflon rebound stop for a comfortable highway ride
- Black powder coat finish
Choosing the right setup
A steering stabilizer sits between the frame and the steering linkage, where it absorbs sudden movements of the front wheels. On a truck that runs larger tires or travels rough trails, those movements can push the wheels off line and transfer shock into the steering box and tie rods. A damper like this one smooths that energy so the wheel returns to center more predictably.
When choosing a stabilizer, the mounting points matter as much as the damper itself. Measure the space between the frame bracket and the tie rod or axle mount, then compare the collapsed and extended lengths with that gap. A stabilizer that is too short can bind at full lock, while one that is too long may have too little preload to do its job.
Stabilizers are often replaced alongside tie rod ends, drag links and track bar bushings, since worn joints let the stabilizer work harder. Inspect the rubber bushings, the mounting hardware and the shaft for leaks or pitting every time the front end is serviced.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 219200B |
| Type | Single steering stabilizer, twin-tube hydraulic |
| Series | PRO-X |
| Extended length | 19.91 inches |
| Collapsed length | 12.17 inches |
| Travel | 7.74 inches |
| Body diameter | 1.75 inches |
| Piston | 1-3/8-inch nylon-banded |
| Shaft | 5/8-inch chrome-hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
Vehicle fitment
It fits these 1992–1998 vehicles: Chevrolet and GMC C/K 1500, 2500 and 3500 pickups and their Suburban versions; Chevrolet Blazer, Tahoe, S10 and S10 Blazer; GMC Jimmy, Sonoma and Yukon; Jeep Cherokee (XJ), Grand Cherokee (ZJ), Wrangler (YJ) and Comanche. It also fits the 1995–1998 Chevrolet Tahoe, the 1998 Chevrolet Tracker, the 1992–1993 GMC Typhoon, the 1993 Grand Wagoneer (SJ) and the 1997–1998 Jeep Wrangler (TJ).
Vehicles from 1999 onward, such as the Grand Cherokee (WJ), are outside these listed years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so the stabilizer needs mounts that match its loop-style upper and lower ends. Confirm your mounting points before ordering, and make sure the stabilizer’s collapsed and extended lengths suit the space between the mounts.
What’s included
One steering stabilizer, sold individually.
Not included: brackets, and the optional shock boot, which is sold separately.









