Overview
The Pro Comp PR2903 is a PRO-M monotube steering stabilizer for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ). Pro Comp intends it for lifted applications and oversize tires.
The stabilizer reduces bump steer and wheel shimmy, and it improves steering stability, reaction and feedback on the road. It is a stabilizer only, so the mounting brackets are not included and a vehicle-specific bolt-on bracket kit is needed.
Key features
- PRO-M monotube design with a zinc finish
- 14 mm chrome hardened shaft
- Extended length of 18.8 inches and collapsed length of 12.4 inches
- Reduces bump steer and wheel shimmy
- Shock boot included
- Vehicle-specific bolt-on bracket kits are the intended installation route
Steering stabilizer basics
A steering stabilizer damps the sudden side-to-side movement of the front axle that causes bump steer and shimmy. On a Wrangler with a lift or larger tires, the tie rod and drag link angles change, making these effects easier to feel. A stabilizer helps keep the steering wheel steady over ruts and washboard roads.
The stabilizer is part of the steering system, so worn tie rod ends, ball joints and track bar bushings should be checked before fitting a new unit. Loose parts can cause the same wander that a stabilizer is meant to control. Inspect the bracket bolts after the first drive and retighten them to the torque in your service manual. Keep the boot clean and free of grit to protect the shaft, and check the stabilizer ends for play by hand each time you rotate the tires.
- Check tie rod ends and ball joints first
- Confirm the bracket kit suits your model year
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2903 |
| Series | PRO-M |
| Type | Steering stabilizer only |
| Design | Monotube, single |
| Extended length | 18.8 inches |
| Collapsed length | 12.4 inches |
| Shaft | 14 mm chrome hardened |
| Finish | Zinc |
| Shock boot | Included |
| Mounting brackets | Not included |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) and the 1997–2006 Jeep Wrangler (TJ).
Its fit covers the 1997–2006 TJ and 2004–2006 LJ Wranglers. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Mounting brackets are not included, so a separate vehicle-specific bolt-on bracket kit is needed to mount the stabilizer. Confirm that the bracket kit matches your model year before installing.
What’s included
One PRO-M steering stabilizer with a shock boot.
Not included: Mounting brackets.













