Overview
The Pro Comp PRO-X steering stabilizer, part number 220500B, is a single twin tube steering stabilizer with a 20.5-inch extended length. It fits the 2007–2018 Jeep Wrangler (JK).
The stabilizer uses a general-purpose twin tube design that damps wheel movement. Damping reduces wheel vibration, which can lead to suspension component fatigue, and it helps limit bump steer from oversized tires or rough roads. The 5/8-inch chrome hardened piston rod and Teflon rebound stop support a comfortable highway ride and steady control on trails.
Key features
- Twin tube hydraulic design in the PRO-X series
- Intended to reduce bump steer from oversized tires or rough roads
- 5/8 in chrome hardened shaft for durability
- 1-3/8 in nylon banded piston
- Teflon rebound stop for a comfortable highway ride
- Loop mounts at both the upper and lower ends
- Black powder coat finish
Signs the stabilizer is worn
A steering stabilizer works against the side-to-side motion the front wheels create when they hit ruts, rocks and uneven pavement. Over time the seals inside a hydraulic unit can wear, and the damping force drops off. Drivers often notice a wandering feel on the highway, more kickback through the wheel on rough roads, or fluid film along the body of the cylinder.
On a Wrangler JK, the stabilizer is usually inspected together with the track bar, tie rod ends and drag link, because a loose joint elsewhere can make a sound stabilizer seem worn. Check the loop mounts and their bushings for cracks, and look for play at the mounting bolts. Recheck the fasteners after the first few trail runs, and have the alignment verified after any steering component is replaced.
- Leaking fluid along the cylinder body
- Cracked or flattened loop mount bushings
- Play at the mounting bolts or pins
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 220500B |
| Series | PRO-X |
| Type | Steering stabilizer only |
| Single or dual | Single |
| Extended length | 20.5 in |
| Collapsed length | 12.98 in |
| Travel length | 7.52 in |
| Body diameter | 1.75 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Brackets | Not included |
| Shock boot | Not included; optional and sold separately |
Vehicle fitment
It fits two-door and Unlimited four-door Jeep Wrangler (JK) models from 2007 through 2018.
The list does not include the TJ, LJ or JL Wrangler generations, or the Gladiator (JT). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use loop mounts, and brackets are not included, so plan on supplying mounting brackets before installing the stabilizer. The shock boot is optional and comes separately. Because this part changes how the steering linkage handles movement, have the alignment checked after installation.
What’s included
One steering stabilizer with a 5/8 in chrome hardened shaft and loop mounts at each end.
Not included: mounting brackets and the shock boot, which is optional.









