Select your vehicle

Rock Krawler JK 3.5 Inch RRD Twin Tube Shock Set for 3.5 Inch Lift – RRD04012

Rock Krawler

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Krawler RRD 3.5 twin tube shock set for a 3.5 inch lift on the 2007 to 2018 JK Wrangler
  • Front and rear positions, emulsion hydraulic type
  • Part number RKSRRD04012

Description

Overview

The Rock Krawler RRD04012 is an RRD 3.5 twin tube shock set for a 3.5 inch lift on 2007 to 2018 Jeep Wrangler JK trucks. It covers front and rear positions, with twin tube construction and an emulsion hydraulic type. It fits the two-door and four-door JK models.

The shocks are valved for the JK, with foam-cell technology and a chrome plated shaft. The maximized fluid capacity helps with heat dissipation, and the set is an economical choice for the JK.

Key features

  • Front and rear positions in one set
  • Twin tube construction
  • Emulsion hydraulic type
  • Foam-cell technology and sintered iron piston
  • Chrome plated shaft

Matching front and rear shocks

Running front and rear shocks from the same set helps keep the truck’s damping balanced from one end to the other. The front shocks control dive under braking and the rear shocks control squat under acceleration, and mismatched damping can make the truck feel unsettled. A 3.5 inch lift changes the geometry at both ends, so buying the pair together is a practical way to keep the setup consistent.

Twin tube shocks are a straightforward design, with an inner working cylinder and an outer reservoir. Emulsion-type fluid is intended to resist aeration during fast movement, which supports consistent damping on rough ground. Heat is the main limit on any shock in hard use, so a design that handles heat well matters on long trail days.

After installation, check each mount and bushing for play and make sure the shock moves freely through its range without binding. Inspect the bodies for leaks and look for signs of uneven wear, such as a bouncy front end or a rear that keeps moving after a dip. Replacing worn bump stops and control arm bushings alongside the shocks is a sensible step.

Specifications

Brand Rock Krawler
Part number RKSRRD04012
Shock series RRD 3.5
Lift 3.5 inch lift
Location Front and rear
Shock type Twin tube
Hydraulic or gas charged Emulsion
Fitment type Direct fit
Vehicle Jeep Wrangler JK, 2007 to 2018

Vehicle fitment

Fits the 2007 to 2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X and X trims.

JL and earlier Wrangler generations are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A front and rear shock set. Confirm the quantity needed for each position and the hardware against your installation before ordering.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RRD04012 cover both front and rear?

Yes. The location is front and rear, so the set covers both positions on the 2007 to 2018 JK models it fits, which keeps front and rear damping matched.

Is this set a twin tube design?

Yes. The shock type is twin tube with an emulsion hydraulic type, and the set is valved for the JK Wrangler.

Does the RRD04012 fit a JL Wrangler?

No. The set fits the 2007 to 2018 JK only, so JL models are not included. Confirm your model year before choosing this set.

Should I replace the front and rear shocks at the same time?

It is a good idea when the old shocks show wear. Replacing both ends together keeps the damping balanced and avoids a truck that handles differently front to rear. Check mounts and bushings during the swap.

Can these shocks be checked at home?

Yes, a basic check is to push down on each corner and see whether the body settles and stops quickly. Look for oil on the body and listen for knocks over bumps. A shock that keeps bouncing or leaks should be replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon