Select your vehicle

Rock Krawler 3.5″ Rear RRD Spec TT Shock – RRD04002

Rock Krawler

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Krawler 3.5 inch rear RRD Spec twin tube shock for JK Wrangler
  • Foam-cell technology, chrome plated shaft and sintered iron piston
  • Sold individually
  • Part number RKSRRD04002

Description

Overview

The Rock Krawler RRD04002 is a 3.5 inch rear RRD Spec twin tube shock for 2007 to 2018 Jeep Wrangler JK trucks. It is sold individually and fits the two-door and four-door JK models.

The RRD Spec twin tube shock is valved specifically for the JK and is an economical choice for the JK Wrangler.

Key features

  • Valved specifically for the JK Wrangler
  • Foam-cell technology
  • Chrome plated shaft
  • Sintered iron piston
  • Maximized fluid capacity for heat dissipation

Rear shock swaps on a JK

A rear shock on a JK carries the axle’s weight and controls its motion over bumps and ruts. Replacing only the rear shocks changes how the rear end feels relative to the front, so many owners look at both ends together. A 3.5 inch rear shock suits a rear lift setup, where the extra travel and length need a matching shock.

Twin tube construction keeps the body simpler, and it is a common choice for value-focused setups. Heat builds up in any shock on rough trails, and maximized fluid capacity helps the shock shed that heat. Foam-cell technology is intended to support steady damping, and a chrome plated shaft resists corrosion at the seal.

When fitting, check that the upper and lower mounts move freely and that the shock does not bind at full extension. Inspect for oil on the body, a bouncy rear end after a dip, and uneven rear tire wear. Bump stops and control arm bushings are often checked at the same time, since they affect how hard the shock works.

Specifications

Brand Rock Krawler
Part number RKSRRD04002
Location Rear
Lift 3.5 inch
Sold Individually
Fitment type Direct fit
Vehicle Jeep Wrangler JK, 2007 to 2018

Vehicle fitment

Fits the 2007 to 2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X and X trims.

Wrangler JL and earlier generations are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock, sold individually. Check the mounting hardware against your installation before fitting.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is this a front or rear shock?

It is a rear shock. The location is rear, the lift is 3.5 inch, and the shock is sold individually for each position.

Does the RRD04002 fit a JL?

No. It fits the 2007 to 2018 Jeep Wrangler JK only, so JL models are not covered. Confirm your model year before choosing this shock.

Is the chrome shaft on this shock hard chrome?

The chrome plated shaft is the finish on this shock. Confirm the finish against your application if it matters for your truck, and check the shaft before fitting.

Should both rear shocks be replaced together?

Yes, when they are on the same axle. Matching damping on left and right keeps the rear end balanced under braking and through corners. A single new shock beside a worn one can make the rear feel uneven.

What causes a rear shock to wear early?

Common causes are binding mounts, worn bushings, and sustained use on rough trails that heats the fluid. Checking the mounts and bump stops at each service helps prevent early failure. Keep the shock clean around the seal so grit does not work into it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon