Overview
The Fabtech FABFTS24212 is a front steel tube fender for the Jeep JL Wrangler and JT Gladiator, sized to allow oversized tires for off-road use. The tube fenders bolt into the factory front mounting holes, replacing the stock fenders and adding protection to the front of the vehicle.
The front fenders are a narrow design, measuring 7.5 inches wide compared with the factory fender. The front fenders include a plug-and-play LED light kit with no cutting or splicing of factory wiring. The light kit covers Daytime Running lights, turn signals and side markers on Rubicon, Sahara and Moab models.
The fender is built from 1.50 OD x .095 wall steel tubing with a .060 thick steel top plate, which helps it absorb side impacts from large objects in tight off-road conditions. The finish is a textured black powder coat, and the fenders are American made.
Key features
- Replaces the factory front fenders in the same mounting holes.
- 1.50 OD x .095 wall steel tubing with a .060 thick steel top plate.
- Narrow design, with front fenders measuring 7.5 inches wide.
- Plug-and-play LED light kit with Daytime Running lights, turn signals and side markers for Rubicon, Sahara and Moab models.
- Sport and Sport S models without factory Daytime Running Lights get turn signal and marker function only.
- Textured black powder coat finish.
Front protection and upkeep
Front tube fenders take the first hit from brush, rock and debris, so the mounting points carry more load than on a stock fender. Steel tubing holds up to impacts well, but fasteners can loosen when the vehicle flexes over uneven ground. A regular check of each bolt and bracket helps the fender keep its position and keeps the light kit aligned.
Powder coat resists chips on its own, but a deep scrape exposes steel that can rust. Touch up scratches with a matching coating and keep mud from sitting on the top plate. If a light kit is installed, check that the lens is seated and the wiring is clear of the tire and fender edge after each trail session.
- Check fasteners after rough trail use
- Touch up deep chips in the powder coat
- Keep the light lens seated and wiring clear
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS24212 |
| Location | Front |
| Type | Tube fender |
| Tubing | 1.50 OD x .095 wall steel |
| Top plate | .060 thick steel |
| Front width | 7.5 inches |
| Finish | Black powder coat |
| Lighting | Plug-and-play LED light kit |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
| Origin | American made |
Vehicle fitment
Fits the 2020–2026 Jeep Gladiator (JT) in 80th Anniversary, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims, and the 2018 and 2021–2026 Jeep Wrangler (JL) Rubicon, Sport and Sport S two-door models, and Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door models.
Wrangler JL models from 2019 and 2020 are not covered, and neither is the two-door Sahara or the Gladiator Altitude. Make sure your model year and trim are covered before ordering.
Installation notes
The installation involves cutting or drilling, even though the fenders bolt into the factory mounting holes. Check the fit and mounting points before final assembly. The light kit is plug and play, but its functions depend on trim. Lighting is subject to local road-use rules.
What’s included
The front fender comes with the plug-and-play LED light kit. Check the mounting hardware against your installation before starting.














