Overview
The Warrior Rear Corners with cutouts for LED lights are short rear corner panels in black, part number 924APC, for 2007–2016 Jeep Wrangler (JK) models. Fitment covers JK trims including Rubicon, Sahara, Sport, Sport S, X and Unlimited versions. Confirm your body style before ordering.
Each corner is black powder coat aluminum diamond plate with pre-cut openings for two flush-mounted LEDs: a 4 inch red stop, turn and tail light and a 2 inch white reverse light. A cutout accommodates the gas tank filler. The corners are American-made, carry a lifetime warranty and are sold in pairs. The LED lights are sold separately.
Key features
- Pre-cut opening for a 4 inch red stop, turn and tail light
- Pre-cut opening for a 2 inch white reverse light
- Cutout for the gas tank filler
- Aluminum diamond plate with black powder coat
- Sold in pairs
- Short corner type
Wiring and lighting setup
Flush-mounted LEDs in the corners need a clean wiring plan before the panels go on. Run the stop, turn and tail light and the reverse light on separate circuits where possible, and use a fused relay so the lights draw power from the battery through a protected path. Route wires away from moving suspension parts and sharp edges, and secure them with clips.
Diamond plate panels are rigid, so check that the openings line up with the lamp housings before drilling any holes. Dry-fit the corners, mark the mounting points, and recheck the cutouts after each step. Inspect the wiring and connectors every few months, especially after off-road use, for chafing, loose terminals or water intrusion.
- Use fused relay wiring
- Check local rules for rear lighting
- Dry-fit before drilling
Specifications
| Brand | Warrior |
|---|---|
| Part number | 924APC |
| UPC | 634146924014 |
| Corner type | Short |
| Material | Aluminum diamond plate |
| Finish | Black powder coat |
| Quantity | Pair |
| LED openings | 4 in red stop, turn and tail light; 2 in white reverse light |
| Installation type | Cutting or drilling required |
Vehicle fitment
The manufacturer fitment list covers 2007–2016 Jeep Wrangler (JK) models, including Unlimited trims. Wrangler models from 2017 onward are not on this list.
Confirm your body style and year before ordering, since Unlimited versions are included.
Installation notes
The corners need cutting or drilling during installation. The LED lights are sold separately and need their own wiring, so use fused relay wiring and check local road-use rules for rear lighting.
What’s included
The box holds a pair of rear corners with pre-cut openings.
Not included: The red stop, turn and tail light and the white reverse light are sold separately.









