Overview
The Fabtech FABFTS24213 is a rear steel tube fender for the Jeep JL Wrangler, sized to allow oversized tires for off-road use. The tube fenders bolt into the factory rear mounting holes, replacing the stock fenders.
The rear fender measures 4.5 inches wide, a narrow design compared with the factory fender. It is built from 1.50 OD x .095 wall steel tubing with a .060 thick steel top plate, which absorbs side impacts from large objects in tight off-road conditions.
The finish is a black powder coat. The front Fabtech fender in the JL line includes a plug-and-play LED light kit. Plan any rear lighting wiring separately and check the package contents first.
Key features
- Replaces the factory rear fenders in the same mounting holes.
- Narrow rear design, measuring 4.5 inches wide.
- 1.50 OD x .095 wall steel tubing with a .060 thick steel top plate.
- Black powder coat finish.
- Built for the listed 2018 and 2021–2026 Jeep Wrangler (JL) models.
Rear fender fit and wiring
Rear tube fenders control debris and mud kicked up by the tire, and they give oversized tires a bit more room during suspension travel. The rear fender is narrow, so fit depends on tire width and the position of the rear bumper and tail components. Check the fit with the tires the vehicle will run before final assembly.
Rear lighting and wiring need extra care because the rear area takes the most spray and flex. Route any new wires away from the tire path, and use grommets wherever wire passes through sheet metal. Recheck connections after the first few drives, and confirm that any added light meets local road rules before driving on public roads.
- Test tire clearance at full articulation
- Use grommets where wire passes through metal
- Recheck connections after the first few drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS24213 |
| Location | Rear |
| Type | Tube fender |
| Tubing | 1.50 OD x .095 wall steel |
| Top plate | .060 thick steel |
| Rear width | 4.5 inches |
| Finish | Black powder coat |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
| Origin | American made |
Vehicle fitment
The manufacturer list covers the 2018 and 2021–2026 Jeep Wrangler (JL) Rubicon, Sport and Sport S two-door models, and the Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door models.
Wrangler JL models from 2019 and 2020 are not on the list, and Gladiator models are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling, so plan for that work even though the fender bolts into the factory mounting holes. Check the fit at the mounting points before final assembly.
What’s included
Check the mounting hardware and fender count against your installation before starting.












