Overview
The Poison Spyder Ricochet Rockers 17-08-040 are bare steel rocker guards for the 2007–2018 Jeep Wrangler JK, made for both 2-door and 4-door models. They protect the rocker panels from trail damage and provide an entry step.
The rockers mount to the frame rather than the body tub, so the protection does not depend on the body’s strength. Dimpled formed plates act as both entry steps and gussets, and the tube sliders hold the sides of the Jeep away from rocks.
Key features
- Frame-mounted, not body-mounted
- Dimpled step plates for entry and exit
- Formed plate guard with standoff
- 1.75 inch OD DOM main tube, .120 wall
- 1.5 inch DOM slider tube, .120 wall
- Bare steel finish
Frame-mounted rockers and body flex
Rocker guards protect the lower body where rocks and stumps strike first. Frame-mounted designs carry the impact load into the frame, so the protection holds up better when the body tub flexes on rough ground. Bare steel shows its character with use, so expect surface marks and plan a coating after installation.
Before cutting, check the area under the rocker for wiring, fuel lines, brake lines and body mounts. Mark the step position first and dry-fit the parts, since cutting is hard to undo. Once mounted, look over the welds or fasteners after the first few trail runs and address any loosening before it becomes a problem.
- Mark the frame and tube position before cutting
- Check for brake and fuel lines underneath
- Coat bare steel soon after mounting
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-08-040 |
| UPC | 614901750713 |
| Mounting | Frame-mounted |
| Main tube | 1.75 inch OD, .120 wall, DOM |
| Slider tube | 1.5 inch, .120 wall, DOM |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
| Body style | 2-door and 4-door |
Vehicle fitment
The rockers are made for the 2007–2018 Jeep Wrangler JK, in both 2-door and 4-door versions.
They are not made for the Jeep Wrangler JL or for the earlier TJ and YJ Wranglers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling, so these rockers are not a bolt-on part. Plan the frame mounting and the step position before starting the work.
What’s included
Rockers with formed plate guards and standoffs. Check the package contents against your installation before starting.












