Overview
The Trail Gear 120003-1-KIT is a 78 in. long pair of bare steel tubular rock sliders for Toyota rocker panels. They guard the lower body against rock strikes on the trail, and the longer length covers more of the rocker. Installation requires welding, and the kit ships unpainted.
Trail Gear builds these sliders from 1 3/4 in. OD x .120 wall 1035 DOM tubing rather than HREW, which the company says is prone to splitting along its seam under heavy stress. The sliders are sold in pairs and are designed to hold the weight of the truck, so a high-lift jack can be used along them to reposition the vehicle or lift it for repairs.
Key features
- 78 in. length, the longest in the 58 in., 67 in. and 78 in. series
- Eight mounting legs, four per side
- Legs ship loose and are 11 1/4 in. long
- Pre-notched legs can be trimmed on the opposite side
- 1 3/4 in. OD x .120 wall 1035 DOM tubing
- Unpainted, lightly oiled bare steel
Welding and frame prep
Welding the rock slider to the frame is the step that decides how well the kit holds up on rough ground. Clean the mounting area to bare metal, fit the sliders and check the leg positions before tacking anything. Eight legs give more attachment points to line up, so measure from fixed body points each time you move a leg.
Bare steel starts to rust as soon as it meets moisture. After welding, grind and clean the seams, then apply primer and paint or a rust-inhibiting coating to the welds and any bare spots. Inspect the welds after the first trail trips, looking for cracks near the legs.
- Clean mounting areas to bare metal before welding
- Mark leg positions before tacking the first weld
- Coat welds and bare steel after grinding
- Inspect weld toes after early trail use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120003-1-KIT |
| UPC | 70000621333 |
| Length | 78 in. |
| Tubing | 1 3/4 in. OD x .120 wall 1035 DOM |
| Finish | Unpainted bare steel, lightly oiled |
| Mounting legs | Eight, four per side, 11 1/4 in. long |
| Installation type | Welding required |
| Sold as | Pair |
Vehicle fitment
It is a direct fit for Toyota rocker panels. Fit is confirmed only at the make level for this 78 in. kit. Confirm fit for your vehicle’s year, model and trim before ordering. The 58 in. and 67 in. versions use six mounting legs.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required. With eight legs, plan the leg positions before welding, since there are more attachment points to align. Trim the notched side only if the fit requires it, and wear eye protection and welding gloves during the work.
What’s included
A pair of 78 in. rock sliders with eight mounting legs, four per side.
Not included: Welding is required, and the eight legs on this 78 in. kit call for careful positioning before any weld is made. Check the box contents against your installation before starting.









