Overview
The Smittybilt M1 Sliders, part number S/B616850, are rock sliders for the 2007-2014 Toyota FJ Cruiser in Base, TRD Special Edition and Trail Teams Special Edition versions. Each slider is a one-piece design from 1.75 inch .120 wall tubing with a dual girder system that guards the sides and underside of the vehicle. The finish is a matte black textured powder coat.
Each slider has a 1/8-inch steel platform with CNC and dimpled steps for sure footed entry and exit. The sliders also provide a rear step point for access to the front of the bed, and a dual purpose rear slider flare adds protection for the rear wheel. The finish is the Smittybilt signature matte black textured powder coat.
Key features
- Aggressive styling
- One-piece design
- 1.75 inch .120 wall tubing
- Dual girder system
- 1/8-inch steel platform with CNC and dimpled steps
- Dual purpose rear slider flare
- Rear step point to access the front of the bed
Rock slider mounting and care
Rock sliders sit low on the frame between the wheels, where they take the first hit from rocks, stumps and ledges. Their main job is keeping the body rocker area intact when the tires are on uneven ground, so the lower body stays protected on tight trails.
Because mounting requires cutting or drilling, plan the work before starting. Mark each point, confirm the slider sits level and clear of the wheel, and check the frame for hidden lines. Sliders are often replaced along with skid plates and rock rails, so look at the lower body as one system.
- Re-check the mounting bolts after the first few trail runs
- Touch up chips in the powder coat before rust starts
- Inspect the platform steps for bends after hard impacts
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 616850 |
| UPC | 631410125504 |
| Type | Formed plate guard with standoff |
| Platform | 1/8-inch steel, CNC and dimpled steps |
| Tubing | 1.75 inch .120 wall |
| Finish | Black powder coat |
| Installation | Cutting or drilling required |
| Fitment | Direct fit |
Vehicle fitment
Smittybilt lists these sliders for the 2007-2014 Toyota FJ Cruiser, across the Base, TRD Special Edition and Trail Teams Special Edition versions.
These sliders are made for the FJ Cruiser, not the 4Runner or Tacoma. Check your year, model and trim against the fitment before buying.
Installation notes
Installation requires cutting or drilling, so mark and check the mounting points before starting work.









