Overview
The Smittybilt Scout Trailer Kit, part number 87400-01, is a trailer only. Accessories shown with the trailer are sold separately. The trailer starts with a fully boxed galvanized steel frame that is powder coated, with heavy duty undercoating on the underside.
The trailer has a payload of 1763 pounds. It has three main doors, each with a locking T-handle latch, and a slider drawer system. The side sliders are rated for a 200 lb capacity, and the rear sliders hold open or closed. A kitchenette cabinet with a locking drawer and a generator and fridge cabinet with a mesh floor are included.
Two-inch receivers sit at each end of the trailer. The front receiver takes an articulating hitch or a pintle hook, and the rear receiver is for accessories. The trailer has electric brakes with an integrated breakaway system and a 7 pin wiring socket.
Key features
- Galvanized steel frame, boxed and powder coated
- Heavy duty undercoating
- 1763 pound payload
- Three main doors with locking T-handle latches
- Slider drawers rated for 200 lbs
- Kitchenette cabinet and generator or fridge cabinet
- Electric brakes with breakaway system
- 7 pin trailer wiring socket
- Removable and adjustable fenders
- Tie down points on the front and sides
Setting up for towing
A trailer is only as good as the tow setup behind it. Match the hitch and coupler to how you tow: the ball coupler suits paved roads, while trails call for an articulating coupler that lets the trailer follow uneven ground. Check the hitch rating on your vehicle before loading, since the trailer’s capacity does not raise the limit of the tow vehicle.
Electric brakes and the breakaway system need attention before each trip. Test the 7 pin connection and confirm the breakaway cable is secure to the tow vehicle. Inspect the galvanized frame, welds and undercoating after rough trips, and keep the shackle mounts free of grit so recovery shackles seat properly.
- Check the 7 pin socket for corrosion
- Inspect welds and shackle mounts after trail use
- Repair chips in the undercoating promptly
- Verify tire pressure before every trip
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 87400-01 |
| UPC | 631410137101 |
| Frame | Galvanized steel, boxed, powder coated |
| Payload | 1763 pounds |
| Slider capacity | 200 lbs |
| Front receiver | 2 inch, for articulating hitch or pintle hook |
| Rear receiver | 2 inch, for accessories |
| Brakes | Electric with integrated breakaway system |
| Wiring | 7 pin socket |
| Shackle mounts | Two rear mounts for 3/4 inch shackles |
| Coupler | 2 inch ball coupler, on-road use only |
Vehicle fitment
Fit depends on the tow vehicle, so check its rating and hitch before pairing it with this trailer.
Off-road use requires an articulating style coupler in place of the ball coupler. Confirm your tow setup before ordering.
Installation notes
The ball coupler is for on-road use only. Off-road use requires an articulating coupler, and the rear shackle mounts take 3/4 inch shackles.
What’s included
The trailer only. Accessories shown in the photos are sold separately.
































