Overview
The Curt Manufacturing CRT13200 is a Class III rear receiver hitch with a 2-inch by 2-inch receiver for the 2014–2019 Toyota Highlander. It uses a round tubular design for mid-capacity towing, with trailer loads above 4,000 pounds GTW and below 10,000 pounds GTW.
The hitch comes in a gloss black powder coat and falls in the Class III/IV weight class. Curt cites a no-drill fit, and the hitch does not fit with a roll pan, so check for one on your vehicle before ordering.
Key features
- Round tubular Class III design built for mid-capacity towing
- 2 Inches X 2 Inches receiver opening
- Drill-free fit
- Trailer range of more than 4,000 pounds GTW and less than 10,000 pounds GTW
- Gloss black powder coat finish
- Not compatible with roll pans
Choosing a Class III hitch
Class III hitches suit a range of mid-size trailers, boats and utility loads, but the rated limits matter more than the receiver size alone. Work out the trailer’s gross weight and tongue weight first, then compare those numbers with the hitch and vehicle ratings. A hitch that is rated for the trailer is only part of a safe setup.
Check the hitch ball diameter, the hitch pin and the clip before each trip, and keep the receiver clear of dirt so the pin seats fully. Watch for loose bolts, cracked welds or bent tubing after rough roads, and tighten or replace parts as needed. Remember that a roll pan prevents this kind of hitch from fitting, so plan your front bumper accordingly.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13200 |
| Mounting position | Rear |
| Fit type | Direct fit |
| Receiver size | 2 inches x 2 inches |
| Hitch class | Class III |
| Weight class | Class III/IV |
| Trailer weight range (GTW) | More than 4,000 pounds and less than 10,000 pounds |
| Finish | Gloss black powder coat |
| Roll pan compatibility | Does not fit with roll pan |
| Installation | The mount is drill-free, so no holes are drilled into the vehicle. |
Vehicle fitment
It fits the 2014–2019 Toyota Highlander in Hybrid LE, Hybrid Limited, Hybrid XLE, LE, LE Plus, Limited, SE and XLE trims.
Highlander model years before 2014 and after 2019 are not covered, and other Toyota models are not part of this fit. Check your vehicle’s year, model and trim against this fitment before ordering.
Installation notes
The no-drill design means the hitch mounts without drilling into the vehicle. Keep trailer weights inside the Class III range and confirm the Highlander’s own towing rating before hooking up.
What’s included
Check the package contents against your installation before starting.
Not included: Other accessories beyond the hitch are not part of this item. Confirm what else you need before ordering.









