Overview
The Smittybilt 2 5/16 inch receiver hitch ball in chrome is a trailer ball for towing with a 2 inch receiver. It is rated to a weight of 6,000 lbs, and the ball has a 2 1/8 inch shank hole.
Smittybilt describes its drop hitch parts as hammer forge hardened from Q235 steel, robotic welded with reinforced gussets, and finished in a powder coat for corrosion and rust protection. The ball is chrome finished.
Key features
- 2 5/16 inch ball size
- Chrome finish
- Weight rating of 6,000 lbs
- Shank hole size of 2 1/8 inch
Choosing a trailer ball
A trailer ball must match the coupler’s size exactly, and the shank must fit the hole in your ball mount. Ball mounts come in several drop heights, so check the height as well as the size before towing. A ball that sits at the wrong height can lift or lower the trailer and affect steering and braking.
Hitch balls are exposed to road salt, water and grit, so inspect the finish and threads regularly. Look for chips in the chrome, rust spots or a loose nut, and replace the ball if the threads or shank show wear. Keep the nut tight and recheck it after the first few miles of towing, especially on rough roads.
- Match ball size to the coupler
- Check shank fit in the mount
- Inspect for chips and rust
Specifications
| Brand | Smittybilt |
|---|---|
| Product type | Receiver hitch ball |
| Ball size | 2 5/16 inch |
| Finish | Chrome |
| Shank hole size | 2 1/8 inch |
| Weight rating | 6,000 lbs |
Vehicle fitment
This ball is not tied to a specific vehicle. Match its 2 5/16 inch ball size to your trailer’s coupler and check the shank size against your hitch before buying.
Confirm the ball size and weight rating against your trailer and hitch before ordering.
Installation notes
Check that the ball’s 2 1/8 inch shank fits the hole in your ball mount, and that the 6,000 lbs rating is not exceeded by the combined trailer load.













