Select your vehicle

Rigid Industries LED Light Roof Rack Mount (Black ) – 40132

Rigid Industries

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Mounts to the OE roof rack of the Toyota FJ Cruiser; confirm model years before ordering
  • Holds one 20-inch and two 10-inch E-Series LED light bars, which are not included
  • Stainless steel construction with a black powder coat finish
  • Part number 40132, UPC 70000577312
  • Rigid Industries cites 18,600 raw lumens for the three-bar setup

Description

Overview

The Rigid Industries 40132 is a black tubular roof rack mount for the Toyota FJ Cruiser. It attaches to the vehicle’s OE roof rack and holds one 20-inch and two 10-inch E-Series LED light bars, which are sold separately. The 20-inch bar points straight ahead and the two 10-inch bars angle to each side for wide forward visibility.

Drivers looking for a roof rack light mount for a Toyota FJ Cruiser will find a stainless steel bracket with a powder coat finish. Rigid Industries cites 18,600 raw lumens for the combined three-bar LED setup.

Key features

  • Tubular roof rack mount that attaches to the OE roof rack of the Toyota FJ Cruiser
  • Holds one 20-inch E-Series LED light bar and two 10-inch E-Series LED light bars (not included)
  • Angles the 20-inch bar straight ahead and the two 10-inch bars to each side
  • Made from stainless steel
  • Durable, long-lasting black powder coat finish
  • Backed by Rigid Industries’ limited lifetime warranty

Wiring and light placement

A roof mount changes how weight and wind load the roof, so it should sit firmly on the OE rack and be checked before each long trip. Tighten all hardware to the torque given in the installation instructions and re-check it after rough roads. Light bars mounted high also catch branches, so angle them to clear low limbs on trails.

Wiring is planned separately from the mount. Route the harness along the rack and through a grommet at the roof edge, and keep it clear of moving parts and sharp edges. Many setups include a switch and a fuse close to the battery, which protects the load. Inspect the powder coat for chips each season, because bare metal near a rack can corrode.

Specifications

Brand Rigid Industries
Part number 40132
UPC 70000577312
Mount type Roof rack mount, tubular
Material Stainless steel
Finish Powder coat, black
Light bar compatibility One 20-inch and two 10-inch E-Series LED light bars (not included)
Rated output 18,600 raw lumens (combined light bar setup)
Warranty Limited lifetime

Vehicle fitment

The mount fits the Toyota FJ Cruiser, where it attaches to the OE roof rack. Confirm the model years your vehicle falls under before ordering.

This mount is made for the Toyota FJ Cruiser. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The roof rack mount only.

Not included: 20-inch and 10-inch E-Series LED light bars.

SKU: RIG40132 Category:

Specification

Shipping weight 18.90 lbs
Package dimensions 54.00 × 18.00 × 12.00 in
brands

Questions & Answers

Is the Rigid Industries 40132 a roof rack light mount for the Toyota FJ Cruiser?

Yes. It attaches to the OE roof rack of the Toyota FJ Cruiser. Confirm your vehicle's year, model and trim before ordering, since the model years covered need checking.

How many light bars does the 40132 mount hold?

It holds one 20-inch E-Series LED light bar and two 10-inch E-Series LED light bars, none of which are included. The 20-inch bar points straight ahead and the two 10-inch bars angle to each side.

Are light bars included with the Rigid Industries 40132?

No. Lights are not included with the mount, so the setup needs separate 10-inch and 20-inch E-Series LED light bars. The mount itself is a tubular roof rack bracket with no lights attached.

What material and finish is the 40132 mount made from?

The mount is made from stainless steel and has a durable, long-lasting powder coat finish in black. Rigid Industries backs it with a limited lifetime warranty.

Does the roof rack mount need its own wiring?

The mount itself carries no wiring. Light bars need a power feed, so plan a harness and a switch separately, routed away from moving parts and sharp roof edges.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon