Overview
The Rigid Industries 49000 Dually Down Angled Flush Mount is a kit that angles a D-Series flush mount LED light 15° up or down. It is a universal fit kit and is not built for a particular vehicle. Use it when a flush-mounted D-Series light needs a downward or upward aim.
The kit is an accessory for D-Series flush mount LED lights and does not replace the light itself.
Key features
- Angles the light 15° up or down
- Made for D-Series flush mount LED lights
- Universal fit listing
- Part number 49000
Aiming a flush light
A downward or upward angle changes where the beam lands, so set the angle with the vehicle parked on level ground. Check the beam pattern on a wall or the ground at night, then fine-tune the position. Keep the light clear of body panels and grilles that could block its output or cause heat issues.
Flush mounts sit close to the surface they are mounted on, which limits how far the light can be moved. Confirm the angle keeps the lens clear of obstacles, and recheck the setting after the first few trips. Dust and mud can build up on the lens, so clean it when the light is cool. Vibration can loosen fasteners, so tighten them and inspect the lens seal periodically.
- Set the angle on level ground
- Check the beam on a wall at night
- Inspect the lens seal periodically
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 49000 |
| UPC | 849774001260 |
| Angle adjustment | 15° up or down |
| Compatible lights | D-Series flush mount LED lights |
| Fitment | Universal fit |
Vehicle fitment
This kit is not vehicle-specific. Mounting position and clearance depend on where the light is installed on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit adjusts the light 15° up or down only.
What’s included
One angled flush mount kit.
Not included: The D-Series flush mount LED light that the kit angles.












