Overview
The Pro Comp 923510B is a PRO-X twin tube shock absorber for the 2007–2018 Jeep Wrangler JK, in both the 2-door and the Unlimited 4-door. It has a 23.8-inch extended length, a 14.3-inch collapsed length and a 9.5-inch travel length, and it is a universal location shock.
The PRO-X is a general-purpose twin tube design, meant for a Wrangler that is mostly driven on pavement with some off-road use. Pro Comp uses 10-stage velocity sensitive valving to adjust damping across road conditions, along with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
This version has a stem upper mount and a loop lower mount. The 2.0-inch body is finished in black powder coat, and the gas charge is nitrogen stabilized. The optional shock boot is sold separately and is not included with the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem upper mount
- Black powder-coated finish
Wrangler JK ride and articulation
The JK’s solid axles flex a lot on uneven ground, and that movement drives the shock through a wide range of motion. A shock that is worn or undersized can run out of stroke at full droop, which lets the wheel lift and the tire lose contact. Check how the shock sits when the suspension is unloaded and again when it is hanging from one wheel.
Stem upper mounts on the JK take a fair amount of load and can wear the bushing faster on trails. Inspect the bushing and the lower loop after trail work, and keep the shock clean so grit does not damage the shaft seal.
- Check stroke at full droop
- Inspect the stem bushing after trail use
- Keep the shaft clean of grit
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 923510B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 23.8 in |
| Collapsed length | 14.3 in |
| Travel length | 9.5 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK 2-door in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and the Unlimited 4-door in the same trims.
The Wrangler JL generation from 2018 onward, and earlier TJ and LJ models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the stem upper mount and loop lower mount against the existing hardware on the JK before installation. The 23.8-inch extended and 14.3-inch collapsed lengths should be compared with your suspension height so the shock has room to move at full droop.
What’s included
A stem upper mount and a loop lower mount come on this twin tube shock. The optional boot is not part of the shock.
Not included: the optional shock boot.









