Overview
The Pro Comp PRO-X 924553B is a twin-tube shock absorber with a 24.7-inch extended length and a 14.6-inch collapsed length. Pro Comp offers PRO-X in extended lengths to accommodate lifted trucks.
The shock has 10-stage velocity sensitive valving, a 5/8-inch chrome hardened piston rod and a Teflon rebound stop. Pro Comp says these give a comfortable highway ride and handle demanding driving conditions. It is intended for vehicles that see mostly paved roads with the occasional off-road trip.
The body is 2.0 inches in diameter with a 10.19-inch travel length. The shock is nitrogen stabilized, has a 1-3/8-inch nylon banded piston and a black powder coat finish, and uses a stem top and eyelet bottom mount. Each shock is sold individually, and shock boots are sold separately.
Key features
- 10-stage velocity sensitive valving
- Nitrogen stabilized, gas charged
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Teflon rebound stop
- Black powder coat finish
- Stem top and eyelet bottom mounts
Trucks that tow and haul
A twin-tube shock keeps a separate reserve chamber, which helps it hold steady damping during repeated bumps. Trucks used for towing or hauling put more load on the shocks, and that is when consistent damping makes the most difference. Stock replacements and upgraded shocks can feel different on rough pavement. The stem top and eyelet bottom mounts need to match the existing hardware before installation.
Super Duty and Ram heavy-duty trucks carry a lot of weight at the rear, so shocks often wear faster than on lighter vehicles. Replacing the shocks in pairs on an axle keeps the damping even from side to side. While the truck is up on stands, check the bushings, mount bolts and bump stops for wear, since they affect how the new shock performs.
- Look for fluid streaks along the shock body
- Check mounts for play before the new shock goes on
- Keep the mount hardware clean and free of rust
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924553B |
| Shock series | PRO-X |
| Shock type | Twin tube |
| Charge | Gas charged, nitrogen stabilized |
| Extended length | 24.7 inches |
| Collapsed length | 14.6 inches |
| Travel length | 10.19 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8-inch nylon banded |
| Shaft | 5/8-inch chrome hardened |
| Top mount | Stem |
| Bottom mount | Eyelet |
| Finish | Black powder coat |
| Quantity | Sold individually |
Vehicle fitment
It fits Dodge Ram 1500 models from 1994 to 2001, Dodge Ram 2500 and 3500 from 1994 to 2001, Ford F-250 and F-350 Super Duty from 2005 to 2021, Ram 2500 from 2014 to 2021, and Ram 3500 from 2013 to 2021.
The list does not cover Ram 1500 models after 2001, Ram 2500 models from 2002 through 2013, or Ram 3500 models from 2002 through 2012. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your truck’s upper and lower mounts match the stem top and eyelet bottom before installation.
What’s included
One PRO-X twin-tube shock absorber, sold individually.
Not included: Shock boots, which Pro Comp sells separately.








