Overview
The Pro Comp Suspension 57012BX-2 is a 2.5-inch rear monotube shock for the 2007 to 2021 Toyota Tundra. It belongs to the PRO-VST series and is tuned to the vehicle it is sold for.
The body is impact forged with thick walls and hard-anodized for lower friction and less bore wear. Pro Comp uses a 17-4 PH stainless steel shaft, chrome plated, for corrosion and abrasion resistance.
Key features
- Rear monotube shock
- Hard-anodized, thick wall impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
Rear shock upkeep
Rear shocks handle bed loads, trailer tongue weight and rough trails, so they see a wide load range. Keep the shaft clean and check the rubber seals after dusty trips. A smooth, quiet stroke usually means the damper is healthy, while knocks, oil film or uneven resistance point to wear.
Mounts deserve a regular check, especially on a Tundra that carries heavy cargo. Inspect the upper and lower bushings, and retighten fasteners after the first several drives. If the rear feels bouncy after a load, the shock may be worn even if the outside looks clean. Replacing both rear shocks at once keeps the ride consistent from side to side.
- Clean the shaft after dusty drives
- Check bushings every few months
- Retighten mounts after the first trip
- Listen for knocks over ruts
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57012BX-2 |
| Shock series | PRO-VST |
| Position | Rear |
| Shock type | Monotube |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
The fit covers the 2007 to 2021 Toyota Tundra, with trims such as the Base, SR5, Limited, Platinum and TRD Pro.
Check fit for other Toyota trucks and the 4Runner against your vehicle’s year, model and trim before ordering.
Installation notes
Check the rear monotube for travel clearance and mount fit before the truck is driven. The PRO-VST design is tuned for the Tundra, so match the part number to the rear position. Measure the existing shock first, since installed length changes ride height at the rear.
Check that the upper and lower mounts are seated and that the body clears the frame before loading the bed. Test the travel by hand after installation to confirm the damper moves smoothly.
What’s included
One rear monotube shock under part number 57012BX-2.

















