Overview
The Pro Comp Suspension 57014BX-2 is a 2.5-inch rear monotube shock for the 2005 to 2021 Toyota Tacoma. It is part of the PRO-VST line, which Pro Comp designs for off-road use with vehicle specific tuning.
The body is hard-anodized and impact forged with thick walls. The shaft is 17-4 PH stainless steel, chrome plated for corrosion and abrasion resistance.
Key features
- Rear monotube design
- Hard-anodized, impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
Tacoma rear shock setup
The Tacoma rear axle moves a lot on trails, so rear shocks need room to travel without touching the frame or spring perch. Measure the installed length of the shock you are replacing and keep notes on mount positions before removing anything. A larger body diameter means clearance matters more, so check it at full compression.
Rear shocks on a Tacoma are often replaced along with the bushings they mount through. Look for cracked rubber or stretched eyelets, and retighten bolts after the first drive. Stiffer valving can change how the rear feels on rough pavement, so expect some change in ride feel after installing a new pair.
- Check frame clearance at full compression
- Compare mount style before ordering
- Inspect bushings for splits
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57014BX-2 |
| Shock series | PRO-VST |
| Position | Rear |
| Shock type | Monotube |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
It fits the 2005 to 2021 Toyota Tacoma in several trims, including the Base, SR, SR5, TRD Off-Road and TRD Pro.
Check fit for the Tundra, 4Runner and FJ Cruiser against your vehicle’s year, model and trim before ordering.
Installation notes
Check the Tacoma rear mounts for eyelet or stud fit before ordering, and match the shock to the rear position. Measure the existing shock first. The body is a larger diameter than many stock shocks, so confirm it clears the frame and spring perch at full compression. The PRO-VST valving is set for the vehicle.
Check the mounts and bushings for fit before the truck is loaded. Confirm the shock moves freely and that its body clears the frame through full compression and rebound.
What’s included
One rear monotube shock under part number 57014BX-2.

















