Overview
The Pro Comp PRO-X front shock, part EXP926501B, is a gas charged twin tube shock for the front position with a 27.1 inch extended length. It fits 2007–2018 Jeep Wrangler JK models.
The shock is 15.9 inches collapsed and has 11.190 inches of travel on a 2.0 inch body. It is nitrogen stabilized and uses velocity sensitive valving with a 1-3/8 inch nylon banded piston. It is designed for paved roads with an occasional off-road trip, and its mounts are matched to the Wrangler JK models it covers.
Key features
- Front position
- Gas charged twin tube body with nitrogen stabilization
- Velocity sensitive valving
- 1-3/8 in nylon banded piston
- 5/8 in chrome hardened shaft
- Black powder coat finish
Front shock replacement
Front shocks do more than control bounce. They help keep the tires in contact with the ground during steering and braking, and they work alongside the steering damper and sway bar links. On a Wrangler JK, a worn front shock often shows up as wandering on the highway or a clunk over rough pavement. Replacing the front pair together keeps the steering feel consistent.
When selecting a front shock, match the mount style and the collapsed length to the existing unit before installing. Check the steering stop and brake line routing, since a longer shock can change clearance at full articulation. Re-torque the mounting fasteners after the first short drive and recheck them after the first few trail runs.
- Check the steering damper and sway bar links
- Confirm brake line clearance at full steering lock
- Re-torque mount bolts after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP926501B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged |
| Position | Front |
| Extended length | 27.1 in |
| Collapsed length | 15.9 in |
| Travel length | 11.190 in |
| Body diameter | 2.0 in |
| Mounts | Loop in the feature list, eyelet in the attribute table |
| Finish | Black powder coat |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK models in the body styles and trims covered by that range. Wrangler TJ and JL models and other vehicles are not covered. Both the two-door and Unlimited four-door bodies fit when the year matches.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is for the front position, so check it against the front shock mounts on your vehicle. Confirm the mount style, loop or eyelet, against your current mounts before ordering. Check that the front mounts allow the 27.1 inch extended length and that the brackets match the mount type.
What’s included
One front PRO-X shock absorber, part EXP926501B.
Not included: the shock boot, which is sold separately.









