Overview
The King Shocks OEM Performance Coilover Shock Kit, part number 25001-138, is a front coilover shock kit for the 2000–2006 Toyota Tundra. It covers 0 inch to 3.5 inch lift kits and bolts onto the vehicle’s existing suspension mounts.
Each kit is tested in real-world conditions to set the damping curves and spring rates. The shock bodies use materials and tolerances matched to high-end race shocks and measure 2.5 inch in diameter. Front kits offer an adjustable ride height and a 25% increase in wheel travel, and the kit is a complete bolt-on installation with no cutting or welding.
Key features
- Coilover design with an internal reservoir
- Gas charged shock body, 2.5 inch in diameter
- Front kit with adjustable ride height
- 25% increase in wheel travel
- Valves adjustable with simple hand tools, using the serviceable design of King race shocks
- Bolt-on installation with no cutting or welding
- Blue finish
Care and inspection
Gas charged coilovers hold pressure inside the body and use an internal reservoir to handle fluid movement. That design rewards regular inspection: look for oil residue along the shaft, check that the body is not dented, and confirm the mounts are tight. A leaking seal or bent shaft changes the damping, so replace the unit rather than patching it.
Front suspension work also affects steering and brakes. Check the brake hoses and tie rod ends after installation, and recheck the top and bottom mounting bolts after the first drives. If the vehicle has a lifted aftermarket suspension, make sure the shock length matches the ride height so the shock does not bottom out at full compression.
- Look for oil streaks along the shock body
- Check mounts and bushings for play
- Replace bump stops that show cracks or flattening
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-138 |
| UPC | 700005378080 |
| Shock series | Performance Series |
| Position | Front |
| Extended length | 19.50 inch |
| Collapsed length | 15.325 inch |
| Travel length | 4.175 inch |
| Shock body diameter | 2.5 inch |
| Hydraulic / gas charged | Gas charged |
| Reservoir | Internal reservoir |
| Lift coverage | 0 inch to 3.5 inch lift kits |
| Finish color | Blue |
| Installation | Bolt-on |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2000–2006 Toyota Tundra in Base, Limited and SR5 trims.
Tundra model years after 2006 and later generations do not fit this kit. Match your year, model and trim before buying.
Installation notes
This is a bolt-on swap with no cutting or welding. Vehicles with lifted aftermarket suspensions may need a custom length rod end. Because these are gas charged shocks, handle them carefully when removing the old units and mounting the new ones.
What’s included
The kit comes complete. Confirm the parts on hand match your installation plan before starting.









