Toyota Tundra parts
2000–2026 models · 507 parts in 160 categories
Slickrock 4x4 lists 507 parts that fit the 2000–2026 Toyota Tundra, across 160 categories. The biggest sections are 82 shock absorbers, 44 lift kits and 27 nerf steps; the most listed brands are Pro Comp Suspension, Go Rhino and ICON Vehicle Dynamics. Pick a category below, or select your model year so every listing and product page on the site checks fitment for you.
Shop Tundra parts by category
Popular Tundra parts
-
Bump Stops
Timbren Active Off-Road Rear Bumpstops – ABSOSR
- Rear Active Off-Road bump stop for 2015–2016 Colorado, Canyon, Nissan Frontier and Toyota Tundra
- Progressive-rate action at the end of axle travel
- Natural rubber compound built for continued use after long off-road sessions
- Lifetime warranty and satisfaction guarantee
- Natural rubber compound with progressive-rate action
SKU: T/IABSOSR -
Truck Bed Tool Boxes & Storage
BAK BAKBox 2 Tonneau Cover Toolbox – 92401
- Part number BKI92401: BAK Industries BAKBox 2 tonneau cover toolbox
- Fits 2000–2021 Toyota Tundra models
- Collapsible cargo box that snaps onto a BakFlip tonneau cover rail
- Up to 400lbs capacity; 11 inches deep, 10 inches wide, up to 65 inches long
SKU: BKI92401 -
-
Tonneau Cover
BAKFlip MX4 Hard Folding Truck Tonneau Cover – 448410
- Listed fit: 2007–2026 Toyota Tundra in eight trims
- MX4 hard folding cover with matte-finished cab corner caps and clamps
- Pre-molded, die-cut shock-absorbent bumpers
- Part number BKI448410 with an extended 5-year warranty
SKU: BKI448410 -
Tonneau Cover
BAKFlip MX4 Hard Folding Truck Tonneau Cover – 448409T
- Listed fit: 2007–2026 Toyota Tundra in ten trims
- Flush mount hard folding MX4 cover with matte-finished cab corner caps
- Upgraded prop rod clips, rails and A-panel and B-side bumpers
- Part number BKI448409T with an extended 5-year warranty
SKU: BKI448409T -
Tonneau Cover
BAKFlip MX4 Hard Folding Truck Tonneau Cover – 448409
- Fits the 2007–2026 Toyota Tundra in several trims
- BAK Industries BAKFlip MX4 hard folding cover, part BKI448409
- Rugged, rustproof aluminum panels with automatic latching
- Rated for up to 400 pounds; matte finish top
- No drilling required for installation
SKU: BKI448409 -
Tonneau Cover
BAKFlip G2 Hard Folding Truck Tonneau Cover – 226410T
- Direct fit for the 2007–2026 Toyota Tundra in eight listed trims
- Hard folding tonneau cover with buckle system and concealed tailgate-lock security
- Capstone and Trail trims are not covered by this part number
- Part number BKI226410T
SKU: BKI226410T -
Tonneau Cover
BAKFlip G2 Hard Folding Truck Tonneau Cover – 226409T
- Fits the 2007–2026 Toyota Tundra per the manufacturer fitment list, across several trims
- Part number BKI226409T: BAK Industries G2 BAKFlip hard folding tonneau cover
- Solid-core panels with rustproof aluminum skins
- Can withstand up to 300 pounds of weight
- Third light for extra visibility and automatic latches
- Installs without drilling
SKU: BKI226409T -
Tonneau Cover
BAKFlip G2 Hard Folding Truck Tonneau Cover – 226409
- Direct fit for the 2007–2026 Toyota Tundra across ten listed trims
- Hard folding tonneau cover with buckle system and concealed tailgate-lock security
- Includes Capstone, Nightshade, Platinum and TRD Pro trims in the list
- Part number BKI226409
SKU: BKI226409 -
Tonneau Cover
BAK Revolver X2 Hard Roll Up Truck Tonneau Cover – 39410T
- Fits Toyota Tundra pickups from 2007 through 2026
- BAK Industries hard roll-up tonneau cover, part number BKI39410T
- Rotational locking rails that lock automatically on both sides
- Marine-grade vinyl finish and flush, no-profile design
- Manual operation; rack compatible, not toolbox compatible
SKU: BKI39410T -
-
Tonneau Cover
BAK Industries Revolver X4s Truck Bed Cover – 80409
- Lists fitment for 2007–2026 Toyota Tundra across several trims
- Matte-black finish on every exterior aspect of the cover
- Part number BKI80409 from BAK Industries
- Flush appearance with dependable protection when closed
- 5-year warranty stated by BAK
SKU: BKI80409 -
Fog Lights
Baja Designs Squardron Sport Fog Pocket Kit (Amber) – 447115
- Squadron Sport amber fog pocket kit with two wide cornering lights
- Plug and play with the factory fog switch and mounting hardware
- 26 watts, 3150 lumens and 2 amps per light
- Fits 2003 to 2019 Toyota 4Runner, 1995 to 2019 Toyota Tacoma and 2000 to 2019 Toyota Tundra
- IP69K and IK10 rated
SKU: BAJ447115 -
-
Tail & Brake Lights
Rough Country 60″ Premium Quad-Row Multi-Function LED Tailgate Light Strip – 78860
Tail & Brake LightsRough Country 60″ Premium Quad-Row Multi-Function LED Tailgate Light Strip – 78860
- Rough Country 60-inch Quad-Row LED tailgate light strip, part number R/C78860
- Brake, running, reverse and turn signal functions from one strip
- Fits Chevrolet Silverado, GMC Sierra, Ford Super Duty, Jeep Gladiator, Nissan Frontier and Titan, Toyota Tundra
- 4-pin plug-in connector, IP68 waterproof, 3-year limited warranty
SKU: R/C78860 -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 929511B
- Fits 2000–2015 Toyota Tundra in several trims, including 1794 Edition and TRD Pro
- 29.8-inch extended length, 17.1-inch collapsed length
- 11.5-inch travel length
- Stem upper mount, loop lower mount
- Twin tube design with 10-stage velocity sensitive valving
SKU: EXP929511B -
-
Disc Brake Pads
Baer Brakes Claw Brake Pads Rear 07-21 Toyota Tundra 08-22 Sequoia 08-11/13-21 Land Cruiser And 08-11/13-21 Lexus Lx570 – D1304
Disc Brake PadsBaer Brakes Claw Brake Pads Rear 07-21 Toyota Tundra 08-22 Sequoia 08-11/13-21 Land Cruiser And 08-11/13-21 Lexus Lx570 – D1304
- Fits 2007–2021 Toyota Tundra, 2008–2022 Toyota Sequoia, 2008–2011 and 2013–2021 Toyota Land Cruiser and Lexus LX570 (rear)
- Baer Brakes D1304 rear ceramic brake pads, four per set
- Slotted, premium grade, with mounting hardware and pad shims included
- Abutment clips and brake lubricant not included
SKU: D1304-BKCZ -
Disc Brake Pads
Baer Brakes Claw Brake Pads Front 07-21 Toyota Tundra 08-22 Sequoia 08-11/13-21 Land Cruiser 08-11/13-21 Lexus Lx570 – D1303
Disc Brake PadsBaer Brakes Claw Brake Pads Front 07-21 Toyota Tundra 08-22 Sequoia 08-11/13-21 Land Cruiser 08-11/13-21 Lexus Lx570 – D1303
- Fits 2007–2021 Toyota Tundra, 2008–2022 Toyota Sequoia, Toyota Land Cruiser and Lexus LX570 (front)
- Premium ceramic friction compound with mechanical pad wear sensor
- Pads per set: 4
- Abutment clips, mounting hardware and pad shims included
- Brake lubricant not included
SKU: D1303-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear 07-21 Toyota Tundra 08-22 Sequoia 08-11/13-21 Land Cruiser 08-11/13-21 Lexus Lx570 – 31483-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear 07-21 Toyota Tundra 08-22 Sequoia 08-11/13-21 Land Cruiser 08-11/13-21 Lexus Lx570 – 31483-020
- Rear drum-in-hat, floating rotor set for listed Toyota Tundra, Sequoia, Land Cruiser and Lexus LX570 applications
- Part number 31483-020: one-piece cast iron, vented, slotted and drilled friction surface
- Five-stud pattern with a 5.91 mounting bolt hole circle diameter, zinc-plated with rust resistant coating
- Sold as a set; limited 1 year warranty; ABS tone ring not included
SKU: 31483-020-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Front 07-21 Toyota Tundra 16-21 Toyota Land Cruiser 08-22 Sequoia 16-21 Lexus Lx570 – 31482-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Front 07-21 Toyota Tundra 16-21 Toyota Land Cruiser 08-22 Sequoia 16-21 Lexus Lx570 – 31482-020
- Front Claw performance rotors for Toyota Tundra, Sequoia, Land Cruiser and Lexus LX570
- Baer Brakes part number 31482-020, floating vented one-piece full-cast rotor
- Slotted and cross-drilled surface with zinc-plated finish and rust resistant coating
- Outside diameter 13.94, overall height 3.28, 5 mounting bolt holes
- Limited 1 year warranty; ABS tone ring not included
SKU: 31482-020-BKCZ -
Tonneau Cover
TruXedo Lo Pro QT Soft Roll Up Tonneau Cover – 563801
- Fits 2007–2021 Toyota Tundra per the manufacturer fitment list
- TruXedo Lo Pro QT soft roll-up cover, part number TRX563801
- Removable low-profile design with about 5-minute reinstallation
- Velcro loop 1 inch wide and a tension control system
- Works with bed rails, bed liners and rail caps
SKU: TRX563801
Toyota Tundra parts by year
Each year opens the full catalog filtered to parts listed for that model year.
200077 parts200176 parts200274 parts200372 parts200477 parts200584 parts200683 parts2007283 parts2008285 parts2009290 parts2010293 parts2011293 parts2012296 parts2013293 parts2014329 parts2015312 parts2016303 parts2017296 parts2018261 parts2019162 parts2020146 parts2021122 parts202231 parts202331 parts202431 parts202529 parts202621 parts

































