Overview
The King Shocks 20C001-374 is a rear 2.0 Performance Series monotube shock for the 2018 to 2026 Jeep Wrangler JL. It has a 2.0-inch body, OEM top and bottom mounts and gas charged construction, and it is a direct fit. It is a rear internal reservoir shock.
King says its OEM performance shock is custom tuned for the Jeep, and that the damping curve and spring rate were developed through real-world testing on the vehicle. The shock is designed for a bolt-on installation at stock height, and King also offers custom lengths for JL trucks running aftermarket lift suspensions.
Stock height and lifted use
Shock length and damping both change how a Wrangler JL rides at different heights. A shock sized for stock height is built around the factory suspension geometry, so the shock compresses and extends within the range the vehicle was designed for. When the suspension is raised, the shock may run at a different length, which is why custom lengths exist for lifted trucks.
Replacing shocks in pairs on the same axle keeps the ride balanced from side to side. Inspect the mounts and bushings when the shocks are replaced, and watch for fluid on the body or excess bounce over bumps, which point to a worn shock. Bump stops should also be checked, since they take over when a shock reaches the end of its travel.
- Match shock length to your ride height
- Replace shocks in pairs on the same axle
- Watch for oil on the shock body
- Inspect bump stops and mounts
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KST20C001-374 |
| Shock series | 2.0 Performance Series |
| Shock type | Monotube, internal reservoir |
| Body diameter | 2.0 inches |
| Top mount | OEM |
| Bottom mount | OEM |
| Hydraulic or gas charged | Gas charged |
| Location | Rear |
| Fitment type | Direct fit |
| Vehicle | Jeep Wrangler JL, 2018 to 2026 |
Vehicle fitment
It fits the 2018 to 2026 Jeep Wrangler JL in the Rubicon, Sport and Sport S two-door trims, and in the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door trims.
Gladiator and earlier Wrangler generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is a bolt-on replacement for the OEM mounts and is designed for stock height. Custom lengths are available for lifted trucks.
What’s included
It is one rear shock absorber with OEM top and bottom mounts. Compare the shock and hardware with your installation before you begin.









