Overview
The King Shocks 25001-373A is an adjustable front remote reservoir shock absorber for the 2018 Jeep Wrangler (JL), in 2 door and 4 door configurations. It uses the same 2.5 inch remote bypass body as the 25001-373, with optional wide range compression adjustment added.
The billet adjuster knob is clearly marked and offers 20 positive clicks of tuning. The valving is designed for 18 and later JL models, aiming for a balance of performance and comfort, and the shock suits 0 to 2.5 inch lift kits as well as stock applications. Installation is 100% bolt-on, and the gas charged unit uses hard chromed 7/8 inch shafts for durability.
Key features
- Billet adjuster knob with 20 positive clicks
- Optional wide range compression adjustment
- Remote bypass design with 2.5 inch zinc plated cylinders
- Hard anodized aluminum finned reservoir
- 7/8 inch diameter hard chromed shafts
- Valving specific to 18+ JL models
- Bolt-on installation for stock and lifted applications
- Fully rebuildable and serviceable
Setting firmness after install
Damper firmness on a remote reservoir shock affects how the Wrangler handles on pavement and how it absorbs trail impacts. A firmer setting keeps body motion down on highway curves and during quick steering inputs, while a softer setting gives more compliance over rocks and washboard. Start with the knob in the middle of its range and make one change at a time, driving the same loop each time so the differences are easy to judge.
Re-check the setting after changing tires or ride height, because a heavier wheel and tire package or a lift changes the load on the shock. Inspect the reservoir hose and the shaft for oil seepage and scratches every few months, and clean grit from the shaft before it slides through the seal. Anyone choosing between a remote bypass and a standard shock should weigh how much adjustment they will actually use.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-373A |
| UPC | 700008516771 |
| Shock series | 2.5 Remote Bypass |
| Charge | Gas charged |
| Position | Front |
| Compression adjustment | Wide range, optional |
| Adjuster | Billet knob, 20 positive clicks |
| Lift range | 0 to 2.5 inch |
| Cylinder outside diameter | 2.5 inch, zinc plated |
| Shaft diameter | 7/8 inch, hard chromed |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims, matching the non-adjustable 25001-373. It is for 2018 JL models only; earlier JK and TJ Wranglers are not covered.
Gladiator and other Jeep models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the adjuster to the intended firmness before the first drive, then check the ride after any change in ride height. The shock can be re-tuned with the billet knob without removing it from the vehicle.
What’s included
Check the package contents against your installation before starting.
Not included: A lift kit is not included. The shock is designed for use with 0 to 2.5 inch lifts.








