Overview
The Skyjacker M9548 is a rear gas monotube shock absorber from the M95 Performance series. It fits 2005–2018 Toyota Tacoma and 2000–2006 Toyota Tundra models and is sized for a 0 – 1 in. lift range on light trucks, Jeeps and SUVs.
The single-tube body helps keep operating temperatures cooler under hard use. Inside, high pressure nitrogen gas works with a floating piston, and the shock includes an internal bump stop and a 46mm bore.
Key features
- Gas monotube design
- High pressure nitrogen gas charge
- Floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
Choosing a rear monotube shock
A rear shock controls body motion as the axle travels over bumps and ruts, so its damping has a direct effect on how the truck handles washboard and highway seams. Gas monotube designs keep the damping fluid under pressure, which limits foaming during repeated compression. That matters most on trucks that spend time on long descents or loose terrain.
When choosing a rear shock, match the lift height and shock length to your suspension before ordering. Many owners replace shocks in pairs so both sides of the rear axle respond the same way. Check bushings, mounts and bump stops at the same time, since worn hardware can change how the shock loads. Inspect the shock body for oil seepage, dents and loose mounting hardware every few oil changes.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9548 |
| UPC | 803696212258 |
| Series | M95 Performance (M95 Series) |
| Position | Rear |
| Construction | Monotube |
| Gas charge | High pressure nitrogen |
| Piston | Floating |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degrees directional |
| Lift height | 0 – 1 in. |
| Fitment type | Direct fit |
| Quantity | Each |
Vehicle fitment
It fits 2005–2018 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims) and 2000–2006 Toyota Tundra (Base, Limited and SR5) models in the rear position.
Front positions and Toyota Tundra years after 2006 are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the 180 degree directional mounting to the orientation your installation requires before final tightening. With a 0 – 1 in. lift range, this shock suits low-lift and stock-height trucks.
What’s included
One rear gas monotube shock absorber.









