Overview
The Rancho RS55370 is an RS5000X Series shock absorber with a 16.27 in extended length, 13.04 in collapsed length and 3.23 in stroke. It is a direct-fit design, so confirm the fit for your vehicle before ordering.
Rancho credits the RS5000X design to a patented rebound valving system and an advanced compression phase, tuned by its ride engineers to improve handling and performance on and off-road. The 3.23 in stroke is the figure to check against your current shock.
Key features
- Patented rebound valving system
- Advanced compression phase from Rancho ride engineers
- Proprietary tuning process for on- and off-road performance
- Stroke of 3.23 in
Stroke and travel explained
Stroke is the distance the shock can move between its fully compressed and fully extended positions. It determines how much the wheel can travel over bumps before the shock runs out of range. A shock with a short stroke can bottom out on rough ground, while a stroke that is longer than the original can change how the suspension sits at rest.
When comparing shocks, look at the extended and collapsed lengths together with the stroke, since the three figures are linked. Before removal, mark the current ride height and take measurements at both mounts. Inspect the eye bushings and bolts while the shock is off, and replace any that are cracked or seized. Taking time at this stage helps the replacement settle correctly.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55370 |
| UPC | 10039703007167 |
| Series | RS5000X |
| Extended length | 16.27 in |
| Collapsed length | 13.04 in |
| Stroke | 3.23 in |
Vehicle fitment
Check the mounting dimensions against your current shock, then verify the year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the 16.27 in extended and 13.04 in collapsed measurements beside your current shock before removal, since the 3.23 in stroke sets how far this shock travels between those two lengths.
What’s included
One RS5000X Series shock absorber, part RS55370, is the item described. No hardware is listed, so check the contents on arrival.












