Overview
The Dana Spicer 10060460 is a rear ring and pinion gear set with a 3.45 gear ratio for the Dana 35 AdvanTEK axle. The pair of gears sets the final drive ratio inside the differential, so matching the ratio to your existing setup matters.
The gears are made to original equipment specifications. The set is matched by axle type, so the axle housing is the key fit check rather than any vehicle model.
Key features
- Rear axle position
- 3.45 gear ratio
- Dana 35 AdvanTEK axle type
- Made to original equipment specifications
Final drive ratio and gearing
The ring and pinion sets the final drive ratio, so changing it changes how engine torque reaches the wheels and how the axle turns at a given speed. A 3.45 ratio is often chosen for highway use, where lower engine speed at cruising is a priority. Check that the ratio fits the tires, transmission and intended driving before ordering.
Gears are sold as a matched pair, and the pinion and ring gear should be replaced together. Mixing new and worn gears leads to uneven contact and noise. Carrier bearings and pinion bearings often wear along with the gears, so inspect them before reassembly and replace any showing damage or roughness.
- Replace ring and pinion as a matched pair
- Confirm ratio against tire size and use
- Inspect carrier bearings before reassembly
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 10060460 |
| Axle location | Rear |
| Axle type | Dana 35 AdvanTEK |
| Axle manufacturer | Dana |
| Gear ratio | 3.45 |
| Fitment | Universal fit, by axle type |
Vehicle fitment
Fitment is by axle type: the Dana 35 AdvanTEK rear axle with a 3.45 ratio. No vehicle year, make, model or trim is named, so confirm the housing before installing.
No other vehicles are named for this set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, carrier bearing preload and backlash all need to be set and checked on this 3.45 set. A break-in period usually follows, so the new gears can settle under light load before full use.
What’s included
The rear ring and pinion gear set is the item described.
Not included: Check the package contents for bearings, shims and seals, which need to be planned for separately.









