Overview
The Dana Spicer D/S10023539 is a rear differential cover for the Ford 9.75 inch axle, made from high-strength nodular iron. It is designed for performance applications and built with ribbing to protect differential components from off-road hazards.
The cover adds rigidity to the housing, and a raised fill plug adds fluid capacity on high pinion angles. Hardware, a drain plug and gaskets come with the cover. Fit is matched to the 9.75 inch rear axle.
Key features
- High-strength nodular iron construction
- Ribbing protects differential components from off-road hazards
- Ribbing ensures greater housing rigidity
- Raised fill plug for increased fluid capacity on high pinion angles
- Designed and engineered for performance applications
Fill level on high pinion setups
A raised fill plug changes where the oil sits in the housing, so the correct fill level depends on the pinion angle. On a steep angle, the usual fill point can read high or low, so confirm the level with the vehicle level and the correct plug height. Checking after a few miles of driving keeps the level accurate.
Ribbed nodular iron covers add strength but also add weight, so think about the total weight carried at the rear. Protective ribs can collect mud, so clean them after off-road use. Inspect the cover after rock impacts for cracks around the mounting ears.
When fitting new gaskets, make sure the cover and the housing are clean. Replace the gear oil during the install if the old fluid looks dark or milky, and torque the drain plug to the value in your service manual.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S10023539 |
| Material | Nodular iron |
| Axle location | Rear |
| Axle type | Ford 9.75 inch |
| Fill plug | Raised, for increased fluid capacity on high pinion angles |
| Included | Hardware, drain plug, Spicer differential cover performance gaskets |
| Fitment | Universal fit |
Vehicle fitment
Fit is by axle size. It is sized for the Ford 9.75 inch rear axle and is universal fit. Confirm the 9.75 inch size on your housing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cover comes with its hardware, drain plug and gaskets. Because the fill plug is raised for high pinion angles, confirm the fill level against your gear setup after fitting. Support the vehicle securely before draining the axle.
What’s included
Hardware, a drain plug and Spicer differential cover performance gaskets are included.












