Overview
It is a single front axle nut for Dana 30 and Dana 44 front axles. It has an M24 x 2 thread, a 1.378 inch hex head and a thickness of 0.770 inch. It fits the 2007–2018 Jeep Wrangler (JK) and the 2018–2026 Wrangler (JL).
It is sold as a single nut, not a kit, and it is made to the same standards as original equipment. Check the thread and hex size against the axle before ordering.
Key features
- Single nut for front Dana 30 and Dana 44 axles
- M24 x 2 thread
- Hex head 1.378 inch
- Thickness 0.770 inch
Axle nut torque and retention
The front axle nut holds the hub and bearing preload on the spindle, so it has a direct effect on wheel stability and bearing life. If it loosens, the hub can move and wear the bearing faster. Because the nut sets bearing preload, the torque value in your service procedure matters more than tightening by feel.
Before reusing a nut, inspect the threads on the nut and spindle for stretching, galling or flattened crests. Clean both sets of threads and check that the nut turns freely by hand before torquing. Recheck the nut after the first drives, since bearings can settle once a new setup has run.
- Inspect nut threads for stretching or galling
- Check the spindle threads along with the nut
- Recheck retention after the first drives
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2008564 |
| Axle model | Dana 30 / Dana 44 |
| Position | Front |
| Sold as | Single nut |
| Thread | M24 x 2 |
| Hex head | 1.378 inch |
| Thickness | 0.770 inch |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in two-door and four-door models, and the 2018–2026 Jeep Wrangler (JL) in two-door and four-door models. Older Wrangler generations and the Gladiator are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
It fits the front position only. Check the axle type before ordering.
Installation notes
Confirm the axle is a Dana 30 or Dana 44 and that the nut is for the front position before fitting. Match the M24 x 2 thread to the spindle.
What’s included
One single front axle nut.











