Overview
The Dana Spicer D/S10048946 is an AdvanTEK upper and lower ball joint kit for the front left or front right of 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT models. Each kit has one upper and one lower joint, plus the nuts and cotter pins needed to install them.
The joints use a metal-on-metal design in place of the plastic inside design found in many OE joints. They are genuine Spicer parts, and they can be lubricated through a grease zerk.
Key features
- Metal-on-metal ball joint design
- Grease zerk for lubrication and service
- Upper and lower joints in one kit
- Nuts and cotter pins included
- Covers the front left or front right side
Signs of worn ball joints
Ball joints connect the steering knuckle to the control arms and let the wheel turn and move up and down. As they wear, the steering can feel loose, the front end may wander, and a clunk may be heard over bumps or when braking. Uneven tire wear on the inside or outside edges can also point to a joint with play, so check the joints along with the tie rod ends and track bar.
Replacing both the upper and lower joints on the same side keeps wear even and avoids a mismatched feel at the wheel. Grease the zerk fitting once the joint is installed, and use only the lubricant the joint calls for. After the work, have the front alignment checked, since changing the joints can alter camber and toe.
- Check for play by levering the wheel with the vehicle safely supported
- Inspect the nuts and cotter pins during installation
- Replace upper and lower joints together for each side
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S10048946 |
| Position | Front left or front right |
| Joints in kit | One upper and one lower |
| Lubeable | Yes, with grease zerk |
| Included | Nuts and cotter pins |
Vehicle fitment
It fits these vehicles:
- 2020–2026 Jeep Gladiator (JT), including Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport
- 2018–2026 Jeep Wrangler (JL), in 2-door and 4-door versions, including Sport, Sahara, Rubicon and Willys trims
Wrangler JK and earlier models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Each kit includes one upper ball joint, one lower ball joint, nuts and cotter pins for one side of the front axle.










