Overview
The Dana Spicer 43682 is an upper ball joint nut for Dana 30 front axles, sold for the driver or passenger side. It secures the upper ball joint stud, so match it to your axle before installing.
Key features
- Upper ball joint nut for Dana 30 front axles
- Driver or passenger side application
- Part number 43682 from Dana Spicer
- Upper ball joint is not lubeable, per the specifications
Tightening and checking the stud
The upper ball joint nut holds the stud in the knuckle, so it carries the load of the steering and suspension joint. A secure nut keeps the stud from pulling loose under turning force. Before fitting a new nut, clean the stud threads and check that the taper and threads are free of damage.
Ball joints often wear in pairs, so check the lower joint and steering components while the upper is open. Look for play in the joint, torn dust boots, or grease leaks as signs of wear. Some upper joints are sealed and do not take grease, so follow the joint design before reassembling.
- Use a new cotter pin or nut lock if one is needed
- Check the stud for wear before reusing it
- Confirm the nut and stud match before tightening
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 43682 |
| UPC | 23913141691 |
| Component | Upper ball joint nut |
| Axle type | Dana 30 front axle |
| Side | Driver or passenger |
| Lubeable | Upper ball joint is not lubeable |
Vehicle fitment
No vehicle fitment is listed. The application is Dana 30 front axles, which is an axle name rather than a vehicle, so confirm the vehicle, year and axle before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The nut secures the upper ball joint stud, so confirm the stud and nut match before tightening it.
What’s included
Confirm the vehicle, year and axle before ordering.









